7783625-1-S-Whirlpool-W10512946-Tri Ring
7783625-1-S-Whirlpool-W10512946-Tri Ring http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/RSDYZ2AA.gif

Tri Ring

PartSelect Number PS7783625

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Will not tumble.
  • Compare At

    $6.97
  • You Save

    $1.16
  • Your Price

    $5.81
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 7 reviews What's this?
1-5 of 7
 

8 of 13 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers, Wrench (Adjustable)

CustomerJohn from Tucson, AZ

Worn out part

The repair was fairly easy. The most timely part of the repair was removing the twelve screws from the back panel to expose the repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 8 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Wrench (Adjustable)

CustomerDavid from Fleetwood, PA

One of the drum support rollers was worn out

I lifted the top of the dryer and removed the front panel. I removed the drum exposing the drum rollers. I replaced the rollers and reassembled the dryer. The exploded views on the web site made it easy to see what to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

Customermichael from indianapolis, IN

Drum very loud when rotating

First I raised the top of the dryer(after unplugging the power cord) disconnected two wires to the front door switch and then removed two screws using a nutdriver. The front cover lifts up and while supporting the drum set the cover aside. Slide the belt off the drum and remove it. I then removed the two support roller tri rings and replaced the rollers and tri rings and reassymbled the dryer.
It was a very simple repair.

Thanks Mike

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 11 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set

Customerrandy from simi valley, CA

Bad drum rooller bearing

took the top, sides and back removed the drum and replaced the roller roller shaft and drive belt and the belt tensioner

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set, Wrench (Adjustable)

CustomerMichael from Marion, KY

Noise in dryer when dryer was turned on

Removed the drum then removed the old parts and installed the new ones. Dryer now runs very quite and heats good. You have very fast service my mother ordered the parts on the net one day and I received the parts next day and did the repair that night and dried clothes. Thanks,

Your great service is very hard to find.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 7