http://www.partselect.com/Schematics/GE/GE_Thumb/00112406i01.gif
See part 69 in the diagram

Ice Funnel - White

PartSelect Number PS758841

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Water dispenser will not dispense water.
  • Compare At

    $26.65
  • You Save

    $4.44
  • Your Price

    $22.21
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Ice Funnel

Part Number 652226

This paddle, when your glass is pushed against it, activates the dispenser to release the ice through the funnel.

$20.09
In Stock

Ice Funnel - Biscuit

Part Number 758842

This part helps guide the ice to your glass.

$19.64
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.1 / 5.0, 6 reviews What's this?
1-6 of 6
 

5 of 8 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDALE from JACKSONVILLE FL

Door dispencer wtr/ice ran continuously.

First I removed the front cover (pried a screwdriver gently under the bottom plastic seal between housing shield and front cover, it came off nice and easy without damage).
Removed electrical plugs from electronic board (front cover) so that it did not hang from the wires and get it the way. Then removed four screws holding housing shield on. Removed housing shield, first observing with new parts next to me how it came apart. and then disassembled funnel from shield. Simple but being careful is the key to putting the new unit together as with any plastic parts it's easy to snap if forced.
Replaced all parts in reverse order removed.
This is a good time to clean all parts for any mold build up that could not be reached otherwise.
Parts select personnel were courteous and very helpful. Especially when I almost ordered the wrong color parts. Ask questions if not sure.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 8 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customereve from carrollton GA

Ice & water dispenser wouldn't shut off

Took the trim piece off, took 4 screws out & replaced the part. Problem solved!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerDON from PETERSBURG VA

Water and ice never flowed from door

Replaced parts by removing four screws.

Old parts were damaged from overheating with a hair dryer because the water line was frozen.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:More than 2 hours

ToolsPliers, Screw drivers

CustomerOLESTER from SAN DIEGO CA

This model is a lemon (on-line for compliants). Numerous problems

Removed 4 screws & replace parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 7 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerRoy from Tucson AZ

Ice cubes fell on floor

Removed front cosmetic panel on freezer door. Removed display. Removed display by pressing down and then out. Removed 4 screws holding display panel and then removed. Removed dispensing Funnel. Installed new dispensing funnel onto new funnel extension. Installed aforementioned using reverse procedure of dispensing funnel removable. Rre-enstalled display panel and display. Replace cosmetic panel on freezer door. Works fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerharold from gramercy AL

Plastic got hot and distorted grandchild turned light don and itgot the parts very hot .

simply removed the parts, and replaced the new parts and disconnected the light switch so it only comes on when using the dispenser and goes off by it's self.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-6 of 6