HOSE & WATER INLET

PartSelect Number PS756806

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Leaking.
  • Compare At

    $8.21
  • You Save

    $1.37
  • Your Price

    $6.84
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 4 reviews What's this?
1-4 of 4
 

4 of 6 people found this instruction helpful

Parts Used

  • HOSE & WATER INLET

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerPaul from Talihina OK

Water leaking from filler hose outside of tub

removed washer front panel, top panel to access the water fill spout and hose. Disconnected and replaced.
personnel at part select were very knowledgable about detailed part and the overnight service was right on time.
I would recommend part select for your next appliance parts needs.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers, Socket set

CustomerBrett F from Sag Harbor NY

A leak thought it was a hose at first but still leaked when washer was not running

REMOVED ALL VISIBLE SCREWS TO EXPOSE WATER VALVE .. REMOVED WATER VALVE , HOSE & WATER INLET AND REPLACED WITH NEW . STRAIGHT FORWARD AND SIMPLE . VERY FAST DELIVERY OF PARTS THAT WAS HUGE .. THANK YOU

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • HOSE & WATER INLET

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Socket set

CustomerDaniel from West Columbia SC

Water leaks

I pulled the top off of the washer and found that my leak was coming from a small hole in the hose and water inlet. I had to remove 2 small bolts and a hose clamp to remove the old part,I did the reverse to install new part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 4 people found this instruction helpful

Parts Used

  • HOSE & WATER INLET

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers, Socket set

CustomerPatricia from Dixon CA

Hole in the hose part

popped the front off and unscrewed the top to get to the water inlet. With plyers twisted the wire tie that holds the hose in place and unscrewed the tiny screws off to get the inlet off. then replace it with my new Hose & Water Inlet.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4