6 of 7 people found this instruction helpful
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Paul from The Villages, FL
Faceplate graphics had a hole over timer display
Removed screws on the front of control panel. Removed screws from back of panel and back venting plate. Lift off the control panel and tilt. Remove screws from display unit and tilt to obtain access to faceplate. Pull off old faceplate and remove the protective backing from new faceplate. Position new faceplate and press to assure firm connection.
Reverse procedure to reassemble. Done. Looks like new.