Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS752092
This black vent grille mounts on the top of the microwave above the door. Screws are NOT included.
This part works with the following brands: GE, Hotpoint & Kenmore.
First I removed the old air/grease filter from the exhaust fan. It get washed monthly, so after several years of use, it was time to replace it. Once the old filter was removed, I opend the new filter package, slide the new filter into the filter slot from left to right. Once in all the way, I slide it back to the right to set it completely. Second I began work on the cracked grill. I removed the phillips head screw on the left side of the grill, then removed the phillips head screw on the right side of the grill. I pulled the old grill off straight out. I opened the new grill package. I started to install the new grill by insert the bottom part first, then insert the top tabs and guide second, make sure I pushed slightly on the grill so it seated top and bottom at the same time. I installed both phillips head screws, left and right side, and completed the job.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Fixing the grill was a snap! I was done in less than 10 minutes.
I removed the broken grille (no screws needed to be removed because the housing for the screws on the grille were broken). After removing the broken grille, I then snapped the new grille in place and tightened the two screws.So easy even a cave man could do it.
I had 4 parts I replaced on our fridge. It took about 25 minutes to fix all four. It was really easy, and now the fridge looks and works brand new again!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.