Quick Question!

Have you ever purchased from PartSelect.com before?

752092-1-S-GE-WB07X10525        -Vent Grille
752092-1-S-GE-WB07X10525        -Vent Grille 752092-2-S-GE-WB07X10525        -Vent Grille 752092-3-S-GE-WB07X10525        -Vent Grille http://www.partselect.com/Schematics/GE/00113377i01.gif

Vent Grille

PartSelect Number PS752092

This black vent grille mounts on the top of the microwave above the door. Screws are NOT included.

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$122.63

You Save

$20.44

Your Price

$102.19
Order within the next 10 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Grille Screw

Part Number 222404

Order within the next 10 hrs and your part ships today!
$4.94
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 4 reviews What's this?
1-4 of 4
 

55 of 84 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Scott from Mercerville, NJ

Grill was cracked and filter was wearing out

First I removed the old air/grease filter from the exhaust fan. It get washed monthly, so after several years of use, it was time to replace it. Once the old filter was removed, I opend the new filter package, slide the new filter into the filter slot from left to right. Once in all the way, I slide it back to the right to set it completely.

Second I began work on the cracked grill. I removed the phillips head screw on the left side of the grill, then removed the phillips head screw on the right side of the grill. I pulled the old grill off straight out. I opened the new grill package. I started to install the new grill by insert the bottom part first, then insert the top tabs and guide second, make sure I pushed slightly on the grill so it seated top and bottom at the same time. I installed both phillips head screws, left and right side, and completed the job.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Vent Grille
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: HEIDI from EL CAJON, CA

Grill was broken

Fixing the grill was a snap! I was done in less than 10 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Vent Grille
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mike from Smyrna, TN

Replaced broken grille

I removed the broken grille (no screws needed to be removed because the housing for the screws on the grille were broken).
After removing the broken grille, I then snapped the new grille in place and tightened the two screws.
So easy even a cave man could do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Vent Grille
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Monica from Lynnwood, WA

Broken parts

I had 4 parts I replaced on our fridge. It took about 25 minutes to fix all four. It was really easy, and now the fridge looks and works brand new again!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4