734018-1-M-Whirlpool-8539324-Upper-Spray-Arm-Mount.jpg
734018-1-S-Whirlpool-8539324-Upper-Spray-Arm-Mount.jpg 734018-2-S-Whirlpool-8539324-Upper-Spray-Arm-Mount.jpg 734018-3-S-Whirlpool-8539324-Upper-Spray-Arm-Mount.jpg

Upper Spray Arm Mount

PartSelect Number PS734018

**Please note: This is a redesigned part. The top mounting clip and screw are no longer needed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Leaking water.
  • Unusual Noise.
  • Will not fill with water.
  • Compare At

    $4.57
  • You Save

    $.76
  • Your Price

    $3.81
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 89 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used

  • Upper Spray Arm Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRobert from Summit NJ

Spray arm broke off the mount

Removed the old mount from the upper rack. Removed the broken stem from the old mount that was attached to the arm. Attached the new mount to the spray arm. Attached the mount and arm to the rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Upper Spray Arm Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAlan from Chicago IL

Mount for top rack spinner broke

Install too less that a minute. Fit perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Upper Spray Arm Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerCharlie from Springville AL

Mounting hardware was broken

Removed the screw that held the mount in place. Snapped the new mount place (no screws required).

Fast & easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Upper Spray Arm Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerLinda from Warrenton VA

Plastic mount was broken for upper level.

We unscrewed the old mount, and installed new mount, inserted screw and tightened. Waa-lah, that was all that needed to be done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Upper Spray Arm Mount

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGeorge from Richmond ME

The original washer arm shaft failed

The original washer arm mount was held with a clip and stainless screw. The replacement was a simpler snap clip, but the shaft was "heavier" plastic. I was doubtful with the snap clip, but I have had no issues in the past two weeks.
Remove the old orignial clip with screw. Remove and SAVE the washer arm retining screw. Look at the orientation of the new clip and shaft. The shaft should be canted to your LEFT so that the washer arm clears the bottom of the rack. Simple snap in install. If you guess wrong at first, simply unclip and reverse. Screw in the washer arm retaining screw. Viola!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Upper Spray Arm Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJim from Modesto CA

Top spray washer axle assembly broke

I took out the screw holding the broken part, then I screwed in the new pivot/axle assemble and snapped it into the top rack. Super Easy!!! The items in the top rack get real clean now!

Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Upper Spray Arm Mount

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerMartin from Manalapan NJ

Cracked h2o mount, upr spray

Took about 10 mins. Only problem was that is was an updated part. Different color (no big deal), but mounting was different. The old mount had a stainless steel screw holding, and this one was just a "snap in". No bidg deal, working good...

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerilham from north haledon NJ

The upperspray arm mounting bracket broke

all i did is to remove the screws out take out the damaged ones and replace them the new ones put the screws back, it was very easy, it save me time and money. Thank-you part select.com

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRandall from Santa Rosa Beach FL

Top spray unit broke off

Received unit in two or three days even during Christmas rush.
Replaced sprayer with just a screwdriver in no time and dishwasher is working perfectly.
PartSelect is the only way to go. I have used them for other parts and they are always prompt and easy to identify parts on their website.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Upper Spray Arm Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPia from Pleasanton CA

Upper water spray arm broke off

My husband put too many things in the dishwasher and it interfered with the upper spray arm. The piece that fastens the upper arm to the top basket broke. Bummer....I run the darn thing at least once a day.

I ordered the part (super easy to do) and it was here the next day. (I only had to do one load by hand). I used a screwdriver to detach the arm, replaced the piece and screwed the new one in place. Five minutes-done.

My husband was impressed. Duh!
:-)

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Upper Spray Arm Mount

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customermark from Sumter SC

Part was broken

Extremely easy. Put part in the upper basket of the diswasher and hooked up the spay arm. If you know how it came off, you should know how it went back on, is the motto. The part fit perfectly and this website did a great job of pictures for comparison.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Upper Spray Arm Mount

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerWilliam from Indianapolis IN

Upper spray arm broken off

Removed one screw holding remainder of the upper spray arm bracket from the top basket. Removed one screw from the underneath side of the spray arm holding it to the Wash Arm Tube Holder. Attached the new Wash Arm Tube Holder to the spray arm, then the whole assembly to the top basket.

PartSelect was GREAT. The pictures on the web site made it easy to determine which part was needed. I ordered around 5pm and chose standard 3-day shipping, but to my surprise the parts showed up at 10:30 am the next day! I'll be back!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerTodd from Dublin CA

Spray arm was loose and the mounting bracket was broken

Put the arm in place, secured with one nut, then underneath with a screw. I attached the little loop that holds the funnel part on and was done. The dishes in the upper rack have never been cleaner.

This web site is the easiest web site I've ever navigated.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Upper Spray Arm Mount

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerBETTY from PETALUMA CA

The spray tube below the arm was all torn up

once I figured out the instructions it went really well.I was most amazed that I received part the next day! That was very fast. I will know where to go next time I need a part. I saved some money and your service is great. Also the vidio instructions are great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerHelen from Nottingham MD

The top rack spray arm disintergrated, along with the rinse aid dispenser cap, and other plastic rack pieces.

I left the repairs in my husbands capable hands and walked away. I now have a "new" dishwasher. Thank you for having what was needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?