7320669-1-S-Whirlpool-W10467168-Pump Hose
7320669-1-S-Whirlpool-W10467168-Pump Hose 7320669-2-S-Whirlpool-W10467168-Pump Hose 7320669-3-S-Whirlpool-W10467168-Pump Hose http://www.partselect.com/Schematics/Maytag/OSFPJUUG.gif

Pump Hose

PartSelect Number PS7320669

This hose attaches to water pump assembly. NOTE: As per the manufacture if the washer has an Eco Ball, it's no longer needed when the new hose is installed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.
  • Compare At

    $26.09
  • You Save

    $4.35
  • Your Price

    $21.74
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

27 of 30 people found this instruction helpful

Parts Used:
  • Pump Hose
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Alexander from Miami, FL

Washer leaking

Opened the front panel with 3 crews T-25 or socket wrench. Panel comes off right away.

Look for the leak. Determined it was the hose. Use power pliers to remove the clamp.

The small clamp was easy. The big one I had to use my yoga to get to it. It probably would had been easy from the back panel but moving the machine requires brute force.

Once the hose was out I found some bra under wires which is what probably punctured the hose.

Removed the front filter and found a bunch of nails.

Assembly was much easier and placed clamps so that if needed it would be a lot easier to remove and replace.

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 20 people found this instruction helpful

Parts Used:
  • Pump Hose
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: Edward from Clinton, MD

Worn out hose had a hole it it.

I romoved the front of the washer access panel. I then used the pliers to remove the clamps from the old hose and to replaceit with the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2