BBB A-Plus
http://www.partselect.com/Schematics/GE/GE_Thumb/00112161i03.gif
See part 247 in the diagram

ORIFICE EVAP FAN

PartSelect Number PS652210

This part works with the following brands: GE, Hotpoint & Kenmore.

In Stock

  • Compare At

    $12.98

  • You Save

    $2.16

  • Your Price

    $10.82
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-2 of 2

 

8 of 20 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerGuy from New Palestine IN

I placed a heat gun in the freezer section to defrost the coils and did not return in time. The heat from the heat gun rose upward and melted all of the soft plastic parts. The good news was that the 16 parts were not expensive but the one main part that was needed to put it all back together took 3

I REPLACED ALL OF THE PLASTIC PARTS AS WELL AS THE HEAT COIL THAT IS MOUNTED AT THE BOTTOM OF THE COILS THAT KEEPS THE COILS FROM FREEZING UP. IF I HAD NOT MELTED THE PLASTIC PARTS THE COIL COULD HAVE BEEN REPLACED IN 2 DAYS, 1 DAY TO RECEIVE THE PART AND THE NEXT TO DO THE WORK. THIS IS THE SECOND TIME I HAVE HAD TO REPLACE THIS HEATER.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 12 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerRick from Gresham OR

Cronic icing in freezer compartment

First I removed the screws to all the interiors panels Then I replaced the fan and defrost heater braket assembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-2 of 2