Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
inability of igniter to shut off
removed cover, removed clip and exchanged part
Darren from Redondo Beach, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old switch would not turn off
remove c clip, remove two wires install new switch, replace c clip, replace two wires test have a cup of coffee
NORMAN from THOMSON, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
12 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
January 9, 2018
Part# ps651383 q:I need to remove the c clip in order to put a new one in, is there a trick to remove the c clip ?Ty
For model number Zdp48n6dh5ss
Hi Tom, Thank you for the question. You should be able to use a tiny screw driver to pop it off or thin needle nose pliers. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
January 7, 2019
My unit continues to click all 5 burners even after it has lit. I am being told the ingition module needs to be replaced. Unit works great except for the fact it clicks the whole time your are cooking something! Thanks
For model number ZGU375NS
Hello Robert, thank you for your question. It sounds like an issue with the spark module PartSelect Number PS1480954. I hope this helps!
Was this helpful?
Thank you for voting!
Howard
September 30, 2019
Every now and then the front center burner starts sparking to trying to ignite. Even when no one is near the range. The gas does not flow only it sparks. You have to turn it on and off several times to make it stop. Should i replace the ignitor?
For model number ZDP36L6HSS
Good Day Howard. Thank you for your question in regards to your unit (Model Number ZDP36L6HSS). Based on our research you may have a leak in your unit where gas is escaping. We would recommend checking over the unit to see if there is any damage that may be causing this to happen. Hope this helps. Best Regards.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
