Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Malcolm
January 28, 2019
I just broke the spindle or rod to which one of the control knobs fits. I guess i need to replace the whole valve assembly? Would this be #24 or #26 part? Or perhaps some other? Thanks
For model number ZGU375NSDSS
Hi Malcolm,
Thank you for your question. The part that the knob would be placed on would be the valve, part 24 in the diagram. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
November 4, 2019
My cooktop burners have dual flames. An upper ring with a high power Flame, and a lower ring with a low simmer ring.On one burner only, the upper ring works properly, but the simmer ring is not on, and does not appear to be getting gas. all other burners work fine.
For model number GE zgu375nsd2ss cooktop
Hi Steve, thank you for your question. There are a couple of parts to check in this case. First you should check your burner electrode. Then you should take a look at your igniter switches/harness. If those parts are fine then you may have to look into your burner tubes to the burner to see if they might need to be changed. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
