651261-1-M-GE-WB07X10530-Vent-Grille.jpg
651261-1-S-GE-WB07X10530-Vent-Grille.jpg 651261-2-S-GE-WB07X10530-Vent-Grille.jpg 651261-3-S-GE-WB07X10530-Vent-Grille.jpg

Vent Grille

PartSelect Number PS651261

This grille does NOT come with screws. This vent grille mounts on the top of the microwave above the door.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $94.87
  • You Save

    $15.81
  • Your Price

    $79.06
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Grille Screw

Part Number 222404

$2.14
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 9 reviews What's this?
1-9 of 9
 

12 of 16 people found this instruction helpful

Parts Used

  • Vent Grille

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDonald from Bellingham MA

Grill needed replacing - it literally fell apart

The grill is located on the top of the microwave - above the door. The plastic seems to have just deteriorated - the plastic around the screws just cracked. There was also another crack on the side of the grill assembly. The micrawave is fairly new (4 years old) and we don't use any harsh cleaners on the plastic grill because it has never required it. The unit is also vented to the outside - so it doesn't get exposed to alot of heat. To put on the new grill - it took 5 minutes, two small phillips head screws. My only question is why did the plastic just fall apart

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Vent Grille

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMelvina from Columbus GA

The grille fell off when I turned the fan on high

I just simply took out the two screws that were holding the grille in place and placed the new grille the tightened up the screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Vent Grille

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDIANE from SAN DIEGO CA

The grille on my microwave was broken

It couldn't have been easier...two screws out, two screws in. Thanks to PartSelect the grille was available and they delivered it quickly. This saved me hundreds of dollars to buy and have a new built-in microwave installed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Vent Grille

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerThomas from Moreno Valley CA

The grill on my microwave "cooked" off from the screws

I removed the two screws that were still attached to the microwave. With the new grill, I replaced the screws and the problem was resolved.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Vent Grille

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSTEVE from CORNVILLE AZ

Through holes for grille broke apart

I lined up the new grille's tabs on the microwave's
holes, carefully pushed it into place, secured it with the two small screws I had saved and badda bing, badda boom, done and done. Perfect fit, looks great. Couldn't have been easier. Thanks.
GE wanted over a hundred dollars for the same part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Vent Grille

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJeffrey from Wilson NC

Plastic retaining tabs and screw posted were cracked / broken on old grille

Unscrewed 2 retaining screws from old grille and discarded old grille. Moved new grille into place and aligned screw holes and secured screws into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Vent Grille

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerthomas from east wenatchee WA

Broken grille

removed grill to replace charcoal filter and noticed that the grill was broken.had to buy a new grill to replace broken one.
new grill is flat black instead of shinney black but thats what happens when you buy with ge numbers. thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Vent Grille

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerstephen a from algonquin IL

Broken grill

All I did was remove the broken grill and replaced with the new grill. It took a screwdriver and two screws. It looks 100% better.

Thank you

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGregory from Liberty NC

Grille was broken, held on by tape

Ordered new unit (should have been gloss black), removed screws, unpackaged new unit, installed unit with care, all plastic parts inserted into holes, screwed unit to microwave.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-9 of 9