651211-1-S-GE-WB06X10420        -Turntable Coupler
651211-1-S-GE-WB06X10420        -Turntable Coupler 651211-2-S-GE-WB06X10420        -Turntable Coupler 651211-3-S-GE-WB06X10420        -Turntable Coupler http://www.partselect.com/Schematics/GE/GE_Thumb/00113377i01.gif

Turntable Coupler

PartSelect Number PS651211

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Tray won’t turn.
  • Compare At

    $6.92
  • You Save

    $1.15
  • Your Price

    $5.77
In Stock
Order within the next 3 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 23 reviews What's this?
1-5 of 23
 

39 of 46 people found this instruction helpful

Parts Used

  • Turntable Coupler

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerScott from Manville, NJ

Original turntable coupler shaft broke in two pieces

I was able to simply lift the broken turntable coupler from the bottom of the microwave. The smaller broken piece fell inside the body of the microwave. I tried unsuccessfully to retrieve it. When the new part arrived, I simply snapped it in place. Everything works good as new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 14 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKerry from Davis Junction, IL

Turntable wouldnt turn,and light sockets were cracked and brittle.

turntable coupler was an easy switch from inside the cooking area(pull out and push in the new part).The light sockets were accessed by removing five screws under the microwave,lowering the panel and replacing the light sockets(one screw in each and two electrical plugins)simple....

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 12 people found this instruction helpful

Parts Used

  • Turntable Coupler

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerEric from CINCINNATI, OH

Turntable coupler broke due to plastic wrap getting tangled

Turntable coupler broke due to plastic wrap getting tangled, top part came out easy, other piece that broke did not come out so easy. Placed used stocking over shop vac end and vacuumed out broken piece, replaced with new coupler. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used

  • Turntable Coupler

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJohnnie from Dayton, TX

Turntable would not turn

Ordered and replaced turntable coupler. Still didn't work.
Ordered turntable motor. Left bottom of microwave open for motor to arrive since the parts are shipped so quickly. Sure nuff parts arrived 3 days later, replaced and walla walla fixed in 10 minutes. Simple, simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

  • Turntable Coupler

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerDavid from San Diego, CA

Microwave turntable stopped turning

1. Turned off circuit breaker for microwave.
2. Removed screws holding the bottom cover of the microwave; cover is hinged at the back, so it dropped open and stayed out of the way.
3. Unplugged turntable motor and removed screws that hold turntable motor in place.
4. Pushed broken pieces of the plastic turntable coupler out of the way (hole for motor's axle not big enough to remove them).
5. Put turntable coupler into hole in bottom of microwave interior, held it in place while putting the motor axle into it from below.
6. Replaced screws holding turntable motor in place, plugged in motor's electrical connector.
7. Closed bottom cover and replaced screws that hold it in place.
8. Switched on microwave circuit breaker.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 23