24 of 37 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
CustomerGregory from Cary NC
Hot burner light always on
Thermal switch is integral to element and can not be changed, must replace entire element.
Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and then moved wiring to new element. Slide new element under bracket and reinstalled single screw. Replaced top and screwed down. Turn on power and test .