650798-1-S-Whirlpool-8523178           -Bottom Door Trim
650798-1-S-Whirlpool-8523178           -Bottom Door Trim 650798-2-S-Whirlpool-8523178           -Bottom Door Trim

Bottom Door Trim

PartSelect Number PS650798

Mounting screws are not included. Bisque in color.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $43.42
  • You Save

    $7.24
  • Your Price

    $36.18
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

TRIM-DOOR

Part Number 650799

$42.30
In Stock

Bottom Door Trim

Part Number 650796

Trim only in white. Screws not included.

$27.57
In Stock

Door Trim - Left Side - Biscuit

Part Number 650795

$31.43
In Stock

Lower Door Trim

Part Number 650797

Mounting screws are sold separately.

$43.91
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

6 of 6 people found this instruction helpful

Parts Used

  • Bottom Door Trim

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMike from West Monroe LA

Bottom door trim was rusting

Simply removed three screws that held the door trim in place. Once the screws are removed be carefull because the front door glass is held in place by the bottom door trim. Otherwise an extremely easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Bottom Door Trim

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDennis from Dunnellon FL

Door bottom trim piece was rusty

Remove three screws, slid old trim piece off door. Slid new trim in place. Used ice pick to align screw holes and replaced screws. Total time about 15 minutes. Tip: used a bead of silicone sealer on the new trim strip to prevent moisture from causing new strip to rust.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Bottom Door Trim

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerJames.O from Newark DE

Lower door trim gets rusty

I have removed this piece once before and painted it,
but it is difficult to prepare surface.

I tried to replace the part without removing the door
but had difficulty getting the screws to line up.

So, I took the door off. Forgot that you are supposed to jam
the spring hinges in the open position before you remove the door. Manual describes how to do this but picture is not very helpful. So I made two wooden dowels about 3/8" in dia by about 3/4" long. Opened the hinge with a screwdriver and jammed the dowels in place.

Door Trim went on easily and the oven door went back on quickly.

Surprised they don't make this trim piece with rust proof material.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3