Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jason Lee B - March 13, 2019
Verified Purchase
Just right
Part was exactly what I needed. Went right on like it should.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My previous ice maker made a ton of noise and stopped making ice
It was as simple as removing two hex head screws to remove the old ice maker, then aligning the new ice maker (ensuring the downspout from the water supply was directed into the opening designated for it) and then screwing the two screws back into place. The most difficult part is the space that you have to work with. It was a little di
... Read morefficult and frustrating, but put in place, an hour later we had ice and it's worked great since!
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
November 27, 2017
Ok. You told me what this part is, now show me where it goes. Your schematic does not show the part in question. Thank you for your assistance in this matter.
Hi William, Thank you for contacting us again. Looking at the ice bin from the top view, the deflector is just behind the ice container's front cover. It sits from the top left side to the right side.It snaps in place. You will want to insert the tabs and snap in the right side first and then the left. Hope this helps!
33 people found this helpful.
Was this helpful?
Thank you for voting!
William
November 24, 2017
What is the function of part #240507202-302647-02?
For model number FGU52642lF2
Hello William,
Thanks for your question. The ice deflector is a piece that closes on the ice bucket to go from crushed to cubed ice. You mainly want to change it if it is not closing properly.
I hope this helps.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Phil
June 28, 2021
Several years ago I found this part loose in the ice bucket after several pieces of plastic came through the ice grinder. The mounting tabs are broken off. The result of this has been runaway ice cube dispensing, so we only use crushed now. Will replacement of this part fix our runaway ice cube dispenser?
For model number dgh52644kf3
Hello Phil, Thank you for the question. Yes, we suggest replacing the Ice Container Deflector Cover to fix the issue. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jonathan
December 5, 2018
I need part number 13 in the diagram. What is the actual name and part number.
For model number FRS6KR5JSB4
Hi Jonathan, thank you for your question. That part is part of your dispenser crusher housing. I have linked that part down below. I hope that helps. Good luck with your repair.
