648909-1-S-Frigidaire-154333902         -Tub Wheel
648909-1-S-Frigidaire-154333902         -Tub Wheel 648909-2-S-Frigidaire-154333902         -Tub Wheel 648909-3-S-Frigidaire-154333902         -Tub Wheel http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/FR1LXKHX.gif

Tub Wheel

PartSelect Number PS648909

This wheel is mounted to the inside cabinet in the dishwasher. This wheel is sold individually and does not come with the mounting hardware.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $5.16
  • You Save

    $.86
  • Your Price

    $4.30
On Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Kit - includes 8 Screws & 8 Washers

Part Number 470437

Use for the upper rack rollers on the upper rack of your dishwasher.

Order within the next 24 mins and your part ships today!
$6.27
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 3 reviews What's this?
1-3 of 3
 

30 of 41 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerTerry from Pleasant View, UT

Top rack was dropping out of rollers/slides

This was the second part of repair. Left side was constantly falling out of the slide. I replaced the same items as above minus the gasket and screw kit. Once done, the right side was sloppy so I orders part for that side plus gasket which slid right in.
1. Removed stops on front end of Upper Dishrack Slide on both sides.
2. Removed Upper Dishrack
3. Remove Roller and Axle/clip (4 each)
4. Push Roller onto Axle on all 4 kits
5. Install all 4 roller kits on Upper Dishrack
6. Remove stops from back end of Upper Dishrack Slides.
7. Remove both Slides
8. Remove 8 each Tub Wheels.
9. Using old or new Screws and Washers, install new Tub Wheels.
10. Install both Upper Dishrack Slides ensuring that small holes are toward the back.
11. Install stops on the back end of Slides.
12 Install Upper Dishrackinto slides
13. Install front stops on slide
14. Pulled out Gasket
15. Install replaced Gasket

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRick from lees summit, MO

No issues

replacing 2 wheels was a breeze. did not need the screws afterall.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customerchris from staten island, NY

Dishwasher racks would come off track

I clipped the wheels onto the rack. It couldn't be any easier. then i removed the # 25 torx screw which attached the broken slide wheel to the tub and installed the new wheel with the same torx screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3