| |
21 of 33 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerFred from Plano TX
Had broken sheves on the doors and the crisper drawers weren't suported
The only difficult aspect of the job was getting the old shelf support stud removed from the refrigerator wall - the support was broken off too short to allow vise grips to hold it. I had to use two screwdrivers to get under and then pop out the stud to the point I could get the pliers to hold. Everything eles pretty much just "fell together" very easily.
|
9 of 10 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer Cover - Glass NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLAUREN from MADERA CA
The upper crisper drawer cover cracked in the front
Simply replaced the drawer cover (frame) of that shelf. Removed crisper drawer, removed glass shelf, removed frame, placed new frame in, then glass, then drawer. Very easy.
|
5 of 6 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers, Screw drivers
CustomerTimothy from Mount Wolf PA
Broken shelf support studs and crisper drawer cover.
No problem, I Just pushed the plastic pin to the old support studs into the frig wall using a small screw driver and hammer and with pliers pulled the studs out to the wall of the frig being careful not to damage the wall. Then with pliers {needle nose} pulled the plastic pin out of the wall. Pushed the new support studs in the hole and tapped the plastic pin with a small hammer into the support stud. Replaced crisper drawer cover and glass shelf. Easy fix
|
3 of 3 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer Cover - Glass NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMatthew from Shawnee KS
Shelf broken
Ordered a new shelf which arrived very fast. Installed in no time at all as it just slides in and rests on brackets. No tools needed and the new part looks just like the original.
|
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerErik from Evans GA
Aged parts broken
After sitting in a cold refrigerator for year after year, plastic becomes brittle and breaks. This is what started happening to my shelves and door bins. The problem a lot of times is getting the right part since some of the parts do not have numbers.
This website gives a accurate description and best of all photos on an inch grid, so I can measure what I have and find what I need. This time everything was perfect and fit easily. took no time and just like that I have almost double the space again. Funny how that works. Once before I didn't get the right piece so just pay attention to the dimensions.
|
2 of 2 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer Cover - Glass NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerNina from Deerfield Beach FL
The frame for the upper crisper drawer cover was cracked.
So simple! I just slid the drawer out of the old frame, inserted it in the new one, and added the glass cover.
|
3 of 6 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerDarin from Nicholasville KY
Guides damaged, crisper pan cracked
1.Got on line to Partselect ordered the parts we needed .they arrived Quickly and in good condition 2.Except the tray was sent in error delaying the repair. 3.contacted Partselect costumer services for assistance 4.Followed their direction and reorder the correct one hoping the correct one would arrive .it did the next day .5.On to repair, removed broken stud with panel stud puller with the aide of a putty knife to spread the pressure of tool stud came out 6.reinserted new stud 7.replaced the new upper crisper drawer cover glass not included . 8.Upper Crisper pan to complete the repair. 9.all in all successful with the help of Partselect superior parts and helpful guides.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyVery Difficult
Time to do repair:More than 2 hours
ToolsPliers, Screw drivers, Wrench(Adjustable)
CustomerKamilah from Cordova TN
Cripser cover support is impossible to install.
The support is still not installed. I cannot remove the old support from the wall of the refrigerator. I have used all kinds of tools.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer Cover - Glass NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJoe from Yorktown VA
Wife broke the crisper cover.
Took the other one out and dropped the new one in.
|
2 of 4 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer Cover - Glass NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerBecky from Effingham IL
Shelf cracked while moving fridge
I removed the shelf and removed the glass (carefully) Cleaned the glass and re-installed it into the new frame that I ordered. Slid the whole thing in the fridge and then put the crisper drawer under the frame. Could not have been easier and the new part is even stronger and better quality than the original.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerKimberly from Baton Rouge LA
Simple
put 4 screws in door handle everythings else just slides into place. took less than 10 min. frig look new again.
|
1 of 2 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer Cover - Glass NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerFred from Ridgewood NJ
Drawer cover had broken
Took out the old cover and installed the new one. Put glass back in and - done!
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerArt from Rowlett TX
Broken upper bastet support and glass
The replacement parts arrived promptly and in excellant condition. Removed the old parts. Installed the new parts, fit perfectly. Problem solved
|
0 of 1 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer Cover - Glass NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerFrank from Orange Park FL
Frame for upper crisper was broken
My wife discovered the Parts Select website. I searched for and found our model number, found what I thought was the part I needed, called and the very professional lady confirmed I was correct. On Wednesday night 11/16/11 I ordered the part, paid for 3-5 day shipping, we were amazed when we received the part (less then 48 hours) on 11/18/11. It took less then 5 minutes to install. I am sure that the day will come when I will need an appliance part, Parts Select will get my business. Frank R.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer Cover - Glass NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerBrenda from Versailles IN
Crisper rack cracked
I lifted the old shelf out and placed the new one in. It was quick and easy. The replacement part came in a very timely manner.
|