Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Danny
May 1, 2023
Is a failed motor board the reason for this set of problems? After finding a corroded connection to the motor (not the board itself) the "sensing" part of the cycle, any cycle, no longer worked. Next, we experienced problems getting the machine to work in any cycle, often having to rotate the dial several times to get a load going in any cycle. Finally, whenever you turn it on it only goes into drain, with the pump running. It will not do anything other than run the drain pump.
For model number FAHE4044MWO
Hello Danny, thank you for reaching out. Based on the description that you have provided, we would recommend you replace the motor control board, part number PS6448008, to fix the issue. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.