6447706-1-S-GE-WE1M1067-Drum Bearing Slide
6447706-1-S-GE-WE1M1067-Drum Bearing Slide 6447706-2-S-GE-WE1M1067-Drum Bearing Slide

Drum Bearing Slide

PartSelect Number PS6447706

Sold individually. There are 2 per dryer. They attach to the outer-most sides of the bearing. Manufacture recommends to replace both slides at the same time.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Noisy.
  • Marks left on clothes.
  • Will not tumble.
  • Takes too long to dry.
  • No heat or not enough heat.
  • Will Not Start.
  • Compare At

    $4.73
  • You Save

    $.79
  • Your Price

    $3.94
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 127 reviews What's this?
121-127 of 127
 

1 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerStephen from CORNWALL NY

The dryer was squeaking like a recently castrated banshee

I first removed four screws above the door opening to lift off the top, then removed two screws, near the top, inside the front, to remove the front. There I found that 2 grey plastic and one white plastic anti-friction strips were worn to nothing (even the large plastic bezel that incorporates the light was starting to wear away, from just a few days!).

When I went to put the front back on, i couldn't get the lip of the drum to ride properly on the felt. In fiddling with it, the drum fell off the rear bearing, too, so I put it back on.

So I ordered new felt, two white and two grey strips (I didn't know if 1 or 2 were in each $8 "kit"--only one per kit), a spare belt--just in case--and some bulbs.

Putting the strips on was easy--15 seconds each. Putting on the felt took all of 20 seconds. I spent more time scraping off the dust and vacuuming things out!

The drum fit over the felt quite easily now, and when I ran it, it was wonderfully quiet. For a minute! Then, it started making a new, grinding noise!

I had a Sears repairman friend come over, and he found that a small platic bushing had fallen off the rear bearing element. Once he put that in place, it all worked perfectly. Beautifully quiet!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerJames from Beaufort NC

While cleaning dryer for low exhaust discharge pressure, I observed one slide (green) 98% worn down, the other three 90 to 95% worn and felt drum seal broke in half.

Opening the dryer door and removed the two screws located at the top of the opening. Pop off top lid of dryer by lifting up on front, and slide forward. I needed to break it loose by prying it up with a screw driver (use light pressure, be careful not to bend/scrape top), as it was first time every being removed. Remove two screws at top of front panel, hold up drum, and pull front panel forward. Unplug electrical cable to door, and removed front panel. Removed and replaced all four slides (2 Green slides & 2 Clear slides). Removed felt drum seal and replaced by lightly pushing in slots (couple of very light pushes using a screw driver was also needed). Placed front panel back on slots at bottom of dryer (REMEBER TO PLUG IN DOOR SWITCH), lifting (lightly) up on drum, and push in place, replaced all parts in reverse order. Top was a little tricky getting back on, but with a little push it snapped in place. Plugged in dryer performed test run everything worked perfect. Thanks to PartsSelect for their quick response to my order, you are definitely on my favorites listing for any future repairs and/or help.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerTony Klancic from Philadelphia PA

Real loud squealing noise and rubbing sound

Took the front of the dryer off to expose drum area and replaced parts needed and reinstalled cover one of the easiest repairs i have ever done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerTod from Cherry Valley CA

Loud squeaking

remove to screws in front to take of top. Then remove two screws holding the face on. change parts re assebmle. extra hands nice for holding drum while remounting face. Nice and quiet now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRICHARD from YORKVILLE IL

Dryer making loud noise

I followed other users comments and it was simple-four screws to unloosen the front panel and lift up the top and access the drum bearing. Two people makes it much easier to hold the door etc. Especially helpful was one's user info on where the two different slides went which was not well depicted on the drawings. The drum bearing snapped out with some pressure using your hands and snapped back in easily. The noise is gone!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerJoseph from Mullica hill NJ

Dryer was making a noise and rotary spring was fulty

Replacing the dryer drum slide took the most time. Opened the dryer door and removed two upper screws that held the frong section of the dryer. Lifete dthe barrel and remove dthe front cover. replaced the drum slides no probelm. Found other components faulty, placed order

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 15 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers, Socket set

Customerbilly from kissimmee FL

Noise in drum

i took the front load dryer apart found the parts that were bad ordered the parts which were a snap at partsselect at first i thought it would be tuff to put back together but the site has good pictures i put the dryer back together but had a tuff time with the belt after i watched a video it went right together i found that taking pictures with my cell phone while taking things apart helped a lot when putting it back together all in all im proud of myself i didnt think i could do it but i did and the dryer works great i will be using the site again i used it a few months ago for my washer it it worked great too!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

121-127 of 127