Quick Question!

Have you ever purchased from PartSelect.com before?

6447706-1-S-GE-WE1M1067-Drum Bearing Slide - Green
6447706-1-S-GE-WE1M1067-Drum Bearing Slide - Green 6447706-2-S-GE-WE1M1067-Drum Bearing Slide - Green http://www.partselect.com/Schematics/GE/00002276i02.gif

Drum Bearing Slide - Green

Compare At

$4.94

You Save

$.82

Your Price

$4.12
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS6447706
Manufacturer Part Number WE1M1067
Manufactured by GE

The drum slides give support to the front of the dryer drum. As they start to break down it may cause your dryer to make noise or not dry clothes in an appropriate amount of time. This item is sold individually. You will need to purchase two as there are two located in your dryer. They attach to the outer-most sides of the bearing. The manufacturer recommends replacing both slides at the same time. Use this as an opportunity to clean out the lint and dust in the dryer to keep your machine running smoothly. This is a genuine replacement part that comes directly from the manufacturer.

This part works with the following brands: General Electric, Hotpoint, Kenmore.

This part works with the following products: Dryer, Washer Dryer Combo.

This part fixes the following symptoms:

  • Noisy.
  • Marks left on clothes.
  • Will not tumble.
  • Takes too long to dry.
  • No heat or not enough heat.
  • Will Not Start.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

Looking to replace the green and the white glides but forget which went where, can you give me rough positioning?

Peter
Answer:

Hi Peter, you can position the white bearing slides at approximately 9 and 3 o’clock (across from each other). The green bearing slides can be placed at approximately 1 and 11 o’clock. I hope this helps you visualize it better!

2 people found this helpful.
Question:

how many of these do I need to order to replace the green drum slides and how many come in a package

Rachel
Answer:

Hi Rachel, the drum slides come in one per package, so you will need to order two of each. For the green drum slides you can order part number WE1M1067, and for the white you can order part number WE1M504. Although only your green drum slides need replacing at the moment, we strongly advise replacing both the green and the white (upper and lower) together for an even wear. Please let us know if you have any further questions.

1 person found this helpful.

Most Helpful

Question:

There is a squeaking noise coming from my dryer. The top two slides look like they’ve seen better days. What do I need to order to fix my dyer?

Andrea
Answer:

Hello Andrea, to fix the squeaking noise you will need two upper bearing slides found here (green) WE1M1067, and two lower bearing slides found here (white) WE1M504. We recommend replacing all of them at the same time for an even wear. Best of luck with this repair!

2 people found this helpful.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 145 reviews What's this?
 

5 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers, Wrench (Adjustable)
Customer: Roger from Taylorsville, IN

This is the case of the squeaking clothes eating dryer,

After several weeks of my wife and kids complaining about that monster in the other room squeaking and jumping around eating all of their clothes I decided to investigate. I removed the plug in from the socket, pulled the dryer out a few feet and decide to follow the instructions I had come across on my iPad, the videos that were listed on parts select were very helpful to watch as I started the repair job, I removed the bad components as instructed in the video, looked up my part numbers on parts select web site and placed the order. Wow within 2 days my parts had arrived and I was ready to reassemble the dryer. That task was very simple thanks to those videos, I was so surprised at the amount of detail that was given, even looking at the parts assembly diagram was very detailed, the repair was completed in no time, with in 45 minutes the parts were installed and the dryer was plugged back in and ready for a test run ! My wonderful wife and kids were so happy to see that daddy had tamed that monster and the clothes would no longer be eaten by that big white monster, they jumped for joy!!!! Every one was happy once again!!! It was so simple a cave man could do it Thanks to you parts select we saved money on a service call, saved money on the parts, and most important that monster will no longer jump around squeaking and yelping and begging for more clothes hubby says, parts select your the best!!!! Thank you Roger Ozbun

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Kristine "the Laundry Quenn" from Frankfort, IL

Insanely high pitched squeeking of and on

-- Unplug dryer from electrical outlet
-- Open Door
-- Remove two screws going up into the top panel
-- Remove top panel
-- Close door
-- Remove two screws holding front panel
-- Remove Front Panel by turning out, keeping left side close to unit since wires are still connected.
-- Vacuum out all loose dust/lint
-- Tilt old Drum bearing toward you to remove.
-- Remove Old Felt Drum Seal
-- Install drum Slides on new Drum Bearing
-- Install new Drum Bearing, make sure it clicks into place securely.
-- Install new Felt Seal, make sure to push in far enough to securely hook to the clips on the bottom of the Drum Bearing.
-- Reinstall front and top panels
-- Plug in electrical
-- Dry

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 12 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: roger from rio rancho, NM

Glides and top housing worn out

removed top of unit, control panel and front of dryer. Disassembled assembly and installed new housing and glides, reassembled and checked operation

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: James from Kennesaw, GA

Dryer drum loud sqeeking noise

Worn out top bearing plastic part and worn out felt. Removed top part of the front where the dial and buttons are, then the top, then the front where the parts I was replacing were. It was overall easy and didn't require a cdertified repair person. These were parts that were worn out. I am dissapointed in the GE product. It is only 3 1/2 yrs old and already worn out. Poor design and poor quality parts. I will look at other brands next time when replacing the front loading dryer and washer. Overall a faril;y easy repair that most mechnicaaly oreinted person can do. Also thaks to partselct for the diagrams which helped tremendously with meticulous parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Troy from Lafayette, CO

Dryer squeaked like crazy for at least half a year!

I read the other repair instructions on this site and looked at the parts diagrams. It wasn't entirely clear how everything came apart but once I started by unscrewing the top of the dryer and removing it (screws were just inside the dryer door) it was easy. Unscrewed the front panel next , swung it out, and it was quick work to install the new bearing with the slides. It wasn't too clear in the parts diagrams but I did need two each of the dryer drum slides and front dryer drum slides, four total, two on each side of the drum bearing. The dryer had been running on the old drum bearing itself, the old slides had worn completely down and the bearing itself was starting to disintegrate too. If I'd caught it sooner I could have reused the bearing and just replaced the slides. Saved a lot of $ and the dryer is nice and quiet again!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Brian from Kilgore, TX

Squeeky drum

Pull the two scews to release the top of the cabinet. Pull the two screws to release the face of the cabinet and tilt out.
Take the old slide out and install the new ones.
Put it back together.
No more squeeks
My wife thinks I'm a genius...

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Karl from Milford, NE

Clothes were catching between the drum and front of dryer. Also was squeaking at times.

Opened dryer door and removed two screws that held front of top panel on. Lifted top panel off and removed two screws that held front panel to side panels. Tipped front panel forward and replaced all four slides. Cleaned everything off and put back together. Works great again. Thanks for this site and for others that have done these repairs before and posted their stories.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: William from Arlington, TX

Dryer squeaking

Removed top - 2 screws. 2 more and the front comes off. I left the wires connected, and leaned the front against the wall. I then popped the drum bearing, with the slides off of the front, and pulled the felt from the lower half. I took some extra time cleaning lint with a shop vac. I then assembled the new parts back onto the front, and pulled the felt into position - it was a little fussy getting it right. The front panel and the top go back, and it`s done. I am glad I ordered the drum bearing, as the felt was worn much more than I would have guessed. This job could probably be done in 15 minutes next time, not including lint clean-up.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: William from WAKE FOREST, NC

Dryer was sqeeling or squeeking

I followed the video on how to repair

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Leroy from MERIDIAN, ID

No problems

Did repair as per the video except I did not disconnect wires, just swung front panel around. Only complaint...discovered parts were much more expensive than other sites.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Janise M from MAHOMET, IL

Squeaking noise that got gradually louder every day. And clothes getting stuck in the drum for months.

I asked my husband to repair it and he said call a repairman. I went online a read stories from others on how easy it was so I ordered the parts myself and did the repair. I strictly followed the video instructions. They were excellent! I also took the time to clean lint from the door and lint trap which i would not have done if a repairman had come to do the work. I now have the confidence to do the rear bearings if they go out!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Stephen from Somerset, NJ

Noisy dryer

The front panel has wear and tear, as was the drum bearing with broken pieces. To buy a new dryer would be several hundred dollars. A repairman told us it is not worth trying to replace the front panel. I found part select and ordered the required parts. All in all my cost is just over 200 dollars and I have a like new dryer. The front panel does not exactly fit my dryer (I guess my dryer is older) so I had to drill two holes to fit the bottom catch plate. I followed the video instructions. It was easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Daniel from Hermon, ME

Squeaky noise

Removed top panel giving access to drum and screws that hold front panel (door). Removed to screws to be able to remove front panel but be careful wires are short not giving you much room to remove panel. Removed plastic Drum Bearing and replaced with New one. Installed slides and put back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Kevin from East Peoria, IL

Dryer made a squeaking noise while running

I removed several torx srews across the back control panel. Removed two philips screws under top of front dryer door. Pulled up on top surface of dryer case. Removed two more screws on backside of front door panel. Pulled front door panel forward and inserted drum slides into slots that they just popped into with a small button rod to keep them in place. The old drum slides were completely worn down or fell off. It runs like a new one again. It is over 10 years old.
The new door handle just snapped into place.
Original door handle had been broken off for several years.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Rebecca from Manitou Springs, CO

Loud squeaky noises when running

I had never tried to fix a dryer before, but I checked your site and found detailed troubleshooting instructions. I found several parts diagrams that made me think it would not be too difficult. I found the GE Repair manual for my dryer and ordered it. I was able to determine that the sqeaking was in the front, and probably the slides were worn, as opposed to the drum roller. Whew! My daughter and I removed the front and checked them. They were totally worn away and the felt was crimped. We cleaned it up and ordered the replacement parts from you. When they arrived we made the repairs. One of the drum slide holders was too worn to hold the new slide so we applied a bit of super glue to hold it in place. My dryer is running quietly again. I am so glad for your online information. This was an fairly easy fix!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS6447706
Manufacturer Part Number: WE1M1067
Brand Model Number Description
Kenmore363DDE8509RCMAADryer
Kenmore363DDE8509RCMWWDryer
Kenmore363DDE9600RCMAADryer
General ElectricBWXR473ET0WWDryer - Electric
General ElectricBWXR473ET2WWDryer - Electric
General ElectricBWXR473ET3WWDryer - Electric
General ElectricBWXR473ET5AADryer - Electric
General ElectricBWXR473ET5WWDryer - Electric
General ElectricBWXR473GT0WWDryer - Gas
General ElectricBWXR473GT2WWDryer - Gas
General ElectricBWXR473GT3WWDryer - Gas
General ElectricBWXR473GT5AADryer - Gas
General ElectricBWXR473GT5WWDryer - Gas
General ElectricDBB3300EA0AADryer - Electric
General ElectricDBB3300EA0WWDryer - Electric
General ElectricDBB3300EA1AADryer - Electric
General ElectricDBB3300EA1WWDryer - Electric
General ElectricDBB3300GA0AADryer - Gas
General ElectricDBB3300GA0WWDryer - Gas
General ElectricDBB3300GA1AADryer - Gas
General ElectricDBB3300GA1WWDryer - Gas
General ElectricDBB5000EF0GGDryer - Electric
General ElectricDBB5000GF0GGDryer - Gas
General ElectricDBB5000GF1GGDryer - Gas
General ElectricDBLR333EE0CCDryer - Electric
General ElectricDBLR333EE0WWDryer - Electric
General ElectricDBLR333EE1CCDryer - Electric
General ElectricDBLR333EE1WWDryer - Electric
General ElectricDBLR333EE2CCDryer - Electric
General ElectricDBLR333EE2WWDryer - Electric