Quick Question!

Have you ever purchased from PartSelect.com before?

5136148-1-S-Frigidaire-241685103-DRUM
5136148-1-S-Frigidaire-241685103-DRUM 5136148-2-S-Frigidaire-241685103-DRUM 5136148-3-S-Frigidaire-241685103-DRUM http://www.partselect.com/Schematics/Frigidaire/VEJJA756.gif

DRUM

PartSelect Number PS5136148

This part helps push the ice threw the front plate to be crushed.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Ice maker won’t dispense ice.

Compare At

$9.89

You Save

$1.65

Your Price

$8.24
Order within the next 3 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

110 of 177 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Lawrence from Wichita, KS

The plasticdrum was broken and would no longer crush or feed the ice through the door

removed screws,removed broken parts and installed new parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Andrew from SALEM, MA

Icemaker not pushing out ice

Consult the exploded view of the Ice Container on this site. A likely cause the end plate (17) is worn. This plate connects the rotating corkscrew to the final plastic worm that pushes the ice into the crusher and thence to your waiting glass. The worm alone will not do the trick. To replace this plate, you need to take out all of the screws you can see, including the one that holds the spring for the crusher select bar.. First, the front cover, then the plate, and finally, locking ring from the worm and the black housing for the crusher. Now you can remove the whole worm assembly. Using a cloth or rubber insulator to protect it, unscrew the end screw and slide off the crusher teeth. Store on the table as a unit to facilitate re-assembly. Slide off the old bar and worm, put them back, and re-assemble. Takes a little dexterity to get the crusher select bar back, but not hard. Easy job.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2