| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerCollin from Orinda CA
Leaking door gasket
This doesn't get easier; pull off the old leaky gasket, open package of new gasket, and replace gasket. DONE!
Good as new and no need for a service call by an expensive repair service.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerWilliam from Lancaster PA
Leaking gasket
Pushed in the new gasket and had excess that I cut off. The new gasket leaked because I was short on one side. I had to stretch the gasket to keep it secure and stop leaking.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerFlo from Montgomery TX
Gasket tore and came loose
The gasket had already come loose. We were able to fit the new one in without any trouble. We were trilled that we did not need to pay to have someone out to replace the part.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerDavid from Maynard MA
Sealing gasket was at end-of-life.
1. Pulled out the old gasket (very easy. slid right out).
2. Carefully noted how it went in (so I could put the new one in correctly)
3. Measured the length of the new gasket. Unnecessarily worried that the new gasket appeared to be 2" shorter than the old one.
4. Cleaned the track and the general area around the dishwasher that rarely gets clean. Took 15 minutes.
5. Inserted the new seal, making certain it was fully inserted all along the track. It was a perfect fit.
6. Patted myself on the back and bragged to my wife that the job was done.
7. Life is good.
Dave in Massachusetts
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerBobby from Temperance MI
|