Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS503621
Note: May need to order part # PS976499 to make water filter fit.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
We considered tape and glue, but we knew that it would look like crap and wouldn't last. Fortunately the bin had a part number on it, so it was easy to order the correct part and it fit perfectly.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I replaced the items myself, there was not much to it. I must comment on the sight. It was very interactive and easy to use!
I was 3 months overdue to change the filter and it stopped working. I ordered the part put it in reset the light and let the water run until the pressure was consistent and the water was running clear. So easy to do. Lesson learned replace the filter when you are supposed to!
We just removed the old filter and installed the new one. Very simple. We are very pleased. Also the filter arrived at our home the day after I placed the order!! Even more reason to be very pleased.
Followed the instruction sheet sent with the water inlet valve. They worked perfectly. Super fast ship from PartSelect.com. Will order again. Thanks.
Removed three screws to remove the water/ice dispenser cover, I then removed 3 more screws to remove the water/ice dispenser. Tilted out the dispenser and got access to the 3 hindge screws. Removed the broken actuator and reversed the process. No too hard, but there is not much room behind the water/ice dispenser due to the water hose connection.
Three easy fixes: removed and replaced stove knob, refridge bin door and water filter, and mixer clutch assembly. Fast prompt service from Partselect.w00t!!!
Had to hold the new filter element cartridge whilst wrestling the refrigerator into place. Whew!
took outthr old one and put in the new one
Replaced water filler. Easy
It is very easy..........push button on the exissting filter. It removes easly, then insert new one. Remember to run the water for 3 minutes before next use. It took about 5 minutes.
Purchased 2 parts on line, easy replacement, one man job, 4 nuts to remove and replace. 20 minutes
Removed the old, installed the new one and finally figure out we had to press the reset button.
I took out the old filter and put in the new filter. I ran some water through it and it was done.
Removed old filter...put in new...ran water for three minutes before drinking. Easiest repair/replacement job ever!!!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.