Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS474712
This oven bake element with push on terminals is a closed hinged bake element. The push on terminals are 1-3/8 inch, and the distance between the two is 1 inch.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
Very easy to replace old bake element with new one. Used screw driver to remove the old element, disconnected wires then connected wires to new element and used the screw driver to secure new element.
Help other customers find the most helpful instructions.
Were these instructions helpful?
just diconnected the electric unscrewed the 2 screws that held the element in place, then i unplugged the old element, plugged in the new element, replaced the 2 retaining screws. that was it! Frigidaire customer service had no clue how to help me find this element for an old wall mount oven. I spent over a half hour on the phone with them.The cool part about parts select is, I was on the phone with them less than 5 minutes and had already found and paid for the element i was looking for. on and off the phone in less than 5 minutes.Thanks a lot parts select, what a great experience doing business with you.
Older model Frigidaire oven (1957?). Worried that couldn't find the bake element for it. Called and got help. Measured the possible part from picture online and looked like it might work. Sure enough it did. Part arrived quickly and matched up well enough and installed with screwdriver in less than 30 minutes. Powered it up and it "glowed" with delight. My wife had her oven back!
This is a big old probably 1950's 40"+ wide electric range with a left and right oven four top burners and a large prep area....the left oven lower bake element failed.....do not try to remove the element....simply slide out oven chamber after removing the safety bracket at the top that keeps the chamber from falling out....probably designed like this for easy cleaning.......the bake element is bolted to the back wall bracket so there are nuts on the back side to remove along with and a contact ground strap......the replacement element has bayonet type connecteors while the original had bent flat metal contacts......I was able to adjust the tension on the stationery contacts in the oven so the beyonet made a good connection....no clue how to duplicate the contacts on the original element nor did I see a choice in my on line parts search......fingers crossed this will last.....great old electric range with spacious ovens
The old bake element was removed with a screw driver and the new element was also installed with a screw driver.
very easy , thank you for you great service, everything went great
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.