Quick Question!

Have you ever purchased from PartSelect.com before?

474640-1-S-Frigidaire-5308950197        -Transmission to Tub Seal Kit
474640-1-S-Frigidaire-5308950197        -Transmission to Tub Seal Kit 474640-2-S-Frigidaire-5308950197        -Transmission to Tub Seal Kit 474640-3-S-Frigidaire-5308950197        -Transmission to Tub Seal Kit http://www.partselect.com/Schematics/Frigidaire/P6HJ8SFU.gif

Transmission to Tub Seal Kit

PartSelect Number PS474640

This is a transmission to tub seal kit, often referred to as a center tub seal kit, and it is used in washing machines to create a seal between the transmission and the tub. This seal works to prevent leaks from around the basket drive shaft, between the outer tub and the spin basket. We reccomend that you replace the tub seal kit if you are replacing the transmission. The kit includes the instructions you will require for installation. Before you begin the repair on your washer, make sure it is unplugged and the water supply is shut off.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Leaking.

Compare At


You Save


Your Price

Order within the next 3 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.5 / 5.0, 1 reviews What's this?
1-1 of 1

23 of 35 people found this instruction helpful

Parts Used:
  • Transmission to Tub Seal Kit
Level of Difficulty: Easy
Time to do repair: More than 2 hours
Tools: Screw drivers, Socket set
Customer: Ron from Williamsburg, MI

Leaking washing machine.

Removing the piece above the tub gasket was very difficult. A lot of hammer and chisel work.
15 year old machine. A lot of calcium build up around the shaft. I used a screw driver as a chisel and a hammer. Carefully removed the metal around the shaft to get to the tub seal.
Once I got to the tub seal it was easy. Remove the old rubber stops. There were a few pieces. Then sealed it back up with the oil that came with the PartSelect Kit and put it back together. Works great now. No more LEAKS! Yippy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1