Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS473177
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
1. Removed the 7 nuts using the nut driver from the freezer back panel inside the freezer.2. Remove the back panel. The evaporator motor and fan are located above the coils.3. Unplug the wiring harness.4. Remove the two gold mounting screws holding the motor and fan in place.5. Remove the motor and fan including the brackets.6. Install the new motor and fan onto the mounting bracket.6a. Attach the green ground to the mounting bracket.7. Screw the two gold screws back into the freezer.8. Attach the new wiring harness. Note, the old harness had a mounting hole/space for it to connect to the wiring harness of the freezer. The new motor's harness was not long enough for this, so it is connected freely to the freezer harness.9. Use the hair dryer to melt any ice that may have formed on the coils and hole where the fan goes.10. Turn the freezer on to see if the fan turns on.11. Reinstall the back panel.All done!
Help other customers find the most helpful instructions.
Were these instructions helpful?
The fan motor all but caught the inside of the freezer on fire . Had to remove then clean, and I mean clean the walls of the freezer . Then had to pry out the old fan without breaking anything . Replacement of new fan was quick and easy because all the parts that I needed were in the bag
first i by passed the timing board, with a ele cord to the fan motor to keep the fridge cool till your parts got here, which was realy fast delivered,the fan would come on because the board was fried.it took abot 30 min to install every thind just be carefully unpluging anything.things will break i guess metal eing cold makes the conne4ctors stick together.evaporator fan is in the frezzer four screws,tested the wires for ohms,and power, when i pluged in the fan i would loss power to the fan,that told me the board was bad, the same night my furnance when to (reaaly) and i lost my borad on the computer ethernet card (lighting isn't fun) it cost to fix everything about 130.00 thanks for thr great parts
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.