0 of 1 people found this instruction helpful
- Control Panel Frame - Black
Level of DifficultyEasy
Time to do repair:15 - 30 mins
CustomerPatricia from West Lafayette, IN
Housing on front of microwave had a crack in corner was just cosmetic
Shut off power to microwave.
I removed the 2 screws that held the vent cover in place this then lifted off. then there was another screw underneath the vent cover after that was removed the whole touch pad including the houseing tiped out of the front of microwave. hard part was finding out how to remove and hold at same time because it was still connected with wires another set of hands would have made this part easier. after figuring out which side to take out first the other side unsnapped in the process. The new part was put on in the reverse connect the side that came out last first, push the whole unit back in place screwing the interior screw then placing the vent cover on and putting the 2 screws that held that in place back.