3 of 10 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers, Socket set
Customercharles from maylene AL
Ice maker quit despensing
Had to test unit to see where problem was.
Remove ice maker box, and base, PITA, to gain access to plug for testing.
Test for 120V going to motor via plug behind ice maker. No power here = problem is in power board. If 120v exists, problem is with dispensing motor.
Ordered part, removed front cover
Removed old board