Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karnik
June 17, 2021
My Freezer will not start. How can I test if its the Relay, compressor or the safety Switch. I have turned the Temp setting to Max, Mid and I have electricity to the Blu/White wires to the relay box. Compressor will not kick in. What test can I do to determine actual part needed
For model number MFU09M2GW2
Hello Karnik, Thank you for the question. To Test the Overload and the Relay on the compressor you will need a multi meter. Touch one probe to the bottom and one probe to the top you should get a beep for continuity or an ohm reading of approximately 0.3 to 0.4 ohms. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.