http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/VLAJQG0H.gif
See part 10 in the diagram

Small Burner Base with Orifice and Igniter

PartSelect Number PS470099

This part also includes 3 screws. Small burner cap is sold separately.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Gas igniter glows but will not light.
  • Compare At

    $25.96
  • You Save

    $4.33
  • Your Price

    $21.63
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

6 of 10 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsSocket set

Customerrobert from san diego CA

I had 2 bad igniters

Since the burner was rusted I decided to replace the entire burner not just the igniter. Ifound that it was more cost effective to put in all new instead of a cheap quick fix. I took a socket wrench to the screws and a cresent wrench for the gas lines. Shut off gas first. Disconnect gas lines first then unscrew the three screws remove then replace with new burner attach screws connect gas lines. Turn on gas check for leaks close cover all finished.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Small Burner Base with Orifice and Igniter

Level of DifficultyEasy

Time to do repair:30 - 60 mins

Tools

CustomerRonald from Manchester NH

Burner would not lite

switch out wires on spark module same burner would not lite
oder burner instead of igniter for four dollars more for new burner and igniter it made sense. Changed burner out burner works
thanks
Ron

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2