467739-1-S-Frigidaire-5303324302        -Door Shelf End Cap - Left Side
467739-1-S-Frigidaire-5303324302        -Door Shelf End Cap - Left Side 467739-2-S-Frigidaire-5303324302        -Door Shelf End Cap - Left Side 467739-3-S-Frigidaire-5303324302        -Door Shelf End Cap - Left Side http://www.partselect.com/Schematics/Frigidaire/SZLINRIC.gif

Door Shelf End Cap - Left Side

PartSelect Number PS467739

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $4.37
  • You Save

    $.73
  • Your Price

    $3.64
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Shelf End Cap - Right Side

Part Number 447375

This white end cap is a little over two inches long. It is used for the right side of either the refrigerator of the freezer door shelf.

$4.40
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 15 reviews What's this?
1-5 of 15
 

4 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Nell from New Orleans, LA

Door shelf retainer bar end caps broke off at insertion point.

Removed plastic male parts. Inserted new end caps onto old retainer bar. Inserted all into door. A snap, but I didn't need to order the retainer bar after all - the old one was the perfect fit and the one I ordered was way too long. I returned the new retainer bar, and the shipping was more expensive than the part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Geoff from Farmington, NM

Door shelf retainer bar was missing from fridge door

The replacement part was a bit too long (about 6"). Measured length of the existing bar that was on lower shelf and used a rotary tool with a metal cutting disc to make the same length. Everything snapped into place easily.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Richard from Palm Springs, CA

Tenants broke bent the retainer bar and broke end caps

The parts were sent out fast, but the wrong retainer bar.
My apartment bldg is in another state, by the time I got up to my apartment bldg to do the repair several weeks had passed and i lost the bill to get a refund and now I have a $40.00 strip of metal sitting in my garage
So the fix time would have been 15 minutes had I received the correct part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Anne from Prudence Island, RI

For years we opened the refridgerator door and the things fell off the bottom shelf.

We ordered end pieces for the shelf holder, attached them to the long piece and snaped them into the door. Three minutes to open the box, attach, and close the door. A less than 20 dollar repair and success!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Lisa from Long Beach, CA

The refrigerator in my new apartment was missing the brackets that hold the bars so that things don't fall off of the door shelves. It was missing several off of the refrigerator door and one off of the freezer door.

I just had to make certain I had the correct end-cap for the correct side. I placed the two little curved pieces into the slots and applied some downward pressure (gently) onto the end-cap till I heard it "snap" into place. You could then see that it was held in place securely. I did first one side, then fed the bar into it, then placed the other side onto the the bar; inserted the end-cap and secured it in place.

HINT: I myself mistakingly ordered the same exact end-cap for both the freezer and the fridge doors. I was unaware (I failed to check), that the end-caps for the freezer are not the same end-caps as the ones for the fridge door. My refrigerator uses three different end-cap sizes; one size for the actual fridge door and two additional different sizes for the freezer door. Not wanting to exchange it, I used the one I ordered anyway. It still works, but makes the bar protrude into the freezer more than it would have, had I ordered the correct size.

SPECIAL NOTE: This company got the correctly ordered products to me within a couple of days. I would definitely order from them again without hesitation. I am very happy with the product and service. Smooth.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 15