Quick Question!

Have you ever purchased from PartSelect.com before?

462423-1-S-Frigidaire-5303297557        -Fresh Food Door Gasket
462423-1-S-Frigidaire-5303297557        -Fresh Food Door Gasket 462423-2-S-Frigidaire-5303297557        -Fresh Food Door Gasket 462423-3-S-Frigidaire-5303297557        -Fresh Food Door Gasket http://www.partselect.com/Schematics/Frigidaire/VOGYFQLT.gif

Fresh Food Door Gasket

PartSelect Number PS462423

This almond door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

Compare At


You Save


Your Price

Order within the next 26 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Freezer Door Gasket

Part Number 461161

This almond door gasket is used to seal the freezer door when closed.

Order within the next 26 mins and your part ships today!
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.3 / 5.0, 1 reviews What's this?
1-1 of 1

7 of 8 people found this instruction helpful

Parts Used:
  • Fresh Food Door Gasket
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver
Customer: John from Bowling Green, KY

Refrigerator door gasket was torn at the bottom

After unpacking the new gasket, I laid it in the sun to warm up and become flexible. Then I removed the freezer and refrigerator doors (removing the freezer door was necessary in order to remove the refrigerator door). Then I laid the refrigerator door flat on the door, and loosened the nuts securing the gasket. I removed the old gasket. Starting at the door's bottom corner, my wife and I worked the new gasket into place, tightening the nuts as we progressed. Fitting the corners in place was the trickiest step. Then we fitted the sides, and finally the top. (I reasoned that if there were any slack, it would be best at the top.)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1