| |
0 of 1 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer - Front NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDavid from Raleigh NC
Drawer slides were cracked
The old drawer front needed to be carefully pried off with a plastic bladed screwdriver. The front simply slides onto the new drawer and is tapped into place with a rubber mallet.
Most impressive was the literally one-day standard (not overnight) delivery!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMichael from Tampa FL
Drawers had broken due to age
Founds parts I needed here. Customer service was very helpful. Parts arrived in very short time frame 1-4 days.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer - Front NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDan from Lakewood CO
Drawer had broken side rails
I removed old drawer. Then I removed the front face panel. I had to wedge the knife in the front bottom so I could remove the face. Installed face on new drawer. Inserted new drawer in fridge.
Voila ! Works great.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer - Front NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerM from Louisville KY
Broken track on upper storage drawer
No tools required! Easy as falling off a log! Drawer face snaps off and reinstalls on new drawer body; slide it in track and you're good to go.
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customerjames from harrells NC
The door would not stay closes
|
0 of 1 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer - Front NOT Included
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerJeff from Willoughby OH
Broken storage drawer
First I removed the old drawer front. When put the old front onto the new drawer I noticed that the two little rubber plugs had nowhere to push into as the holes were not drilled out. I got my portable drill and drilled out the holes, then I slid the drawer front into place snapped it in and pushed in the plugs.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Upper Crisper Drawer - Front NOT Included
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMichael from Wesley Chapel FL
Broken drawer
I removed old drawer, removed face plate, installed faceplate on new drawer. Test OK.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerNellie from Plainfield IN
Old wire racks
Took out old racks and stuck in new ones. Machine looks like new and the slides work better too. For the top rack, remove the ends of the rails and the center post. Put the new rack in then install the center post on the new one. Easy, really easy.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerKenneth from Loganville GA
Cracked & broken rail slides
pulled drawer front off and install on new drawers very easy
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJames from Lake Havasu City AZ
Drawers are cheaply made and woreout quickly
The job was as simple as could be pry away the old and push in the new.
Only wish I had done years ago. Tthis is a great service to customers.
|