461210-1-S-Frigidaire-5303288973        -Crisper Drawer Cover Support
461210-1-S-Frigidaire-5303288973        -Crisper Drawer Cover Support 461210-2-S-Frigidaire-5303288973        -Crisper Drawer Cover Support 461210-3-S-Frigidaire-5303288973        -Crisper Drawer Cover Support http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/UXM8XE0P.gif

Crisper Drawer Cover Support

PartSelect Number PS461210

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $4.31
  • You Save

    $.72
  • Your Price

    $3.59
In Stock
Order within the next 12 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 9 reviews What's this?
1-5 of 9
 

21 of 29 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerEdward from Brooklyn, NY

The main tray holding the vegetable bins had broken and prevented the bins from operating smoothly

Removed all food and slid the broken shelf tray. I replaced the right side tray support and installed the new tray.
I also had to replace the front of one of the bins, as the shelf was binding the bin and the front handle had broken due to amount of force needed to open that bin.
Once the tray was in properly, the bins worked normally.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used

  • Crisper Drawer Cover Support

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

Customermichael from hanford, CA

My shelf supports broke

I pulled out the old pieces and poped what I couldn't into the foam insulation behind the support. Then I placed the new piece in the hole and popped the plastic pin to seat the support. bang. the only problem I had was knowing if it was the right part by the picture. The little pin that had to be pushed through kinda threw me.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers

CustomerRaymond from Anchorage, AK

Freezer drawer rail caps and crisper drawer supports were broken

I removed the old parts, installed the new parts and reassembled the crisper drawer and rails. For less than $50 delivered I was able to bring the unit back to service for our family.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerDiptendra from Palo Alto, CA

The cover storage pan broke, so I needed to replace it.

I removed the drawer, removed the cover and replaced with the new one. One of the cover support has a small crack and thus i ordered two with the intention of removing them. As they still can support the weight of the drawer I did not remove them.
I looked at other companies for this part throgh the internet but your drawing is very clear and it was real easy to select the part. The person with whom I talked was very helpful .

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Crisper Drawer Cover Support

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerArand from Yorktown, IN

The original support was broken, tried epoxy and it only held for a few months before breaking again

All I had to do was remove the original support that was on the inside wall of the refrigerator, which I had to use pliers since there were broken pieces, and then I just snapped the new one into the three holes provided for this support. The crisper drawer works fine now. It literally only took about 1 minute.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 9