Part Location Diagram of 5303280326 Frigidaire V-Style Belt
See part 7 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

V-Style Belt 5303280326

 Fits your AW200C2W!

Rated by 3 customers 

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 37.34
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your AW200C2W!
PartSelect Number PS459613
Manufacturer Part Number 5303280326
Manufactured by Frigidaire
Product Description

V-Style Belt Specifications

This v-style belt or drive belt is designed for use in your washing machine. This part connects the drive motor to the drive system in the washer, which spins the basket. If you notice a burning smell when your washing machine is operating, or if your machine pumps but will not spin, you may have to replace the v-style belt. This part is cloth-covered. This product measures approximately 10 inches in diameter and is sold individually. This is an OEM part sourced directly from the manufacturer. Be sure to disconnect the power source from the washing machine before you begin this repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Burning smell
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kelvinator, Gibson, Kenmore.
Part# 5303280326 replaces these:
AP2142495, 3235, 08004064, 3161152, 5303161152, 8004064, F000133171, F133171, F133171-000, F133171000, F144667-000
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.0 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
drive belt replacement
removed rear panel, tilted machine forward, removed four bolts holding the pump and loosened the connection to the motor shaft,(several times dropped socket and without magnet to retrieve tools would have been much more difficult),removed two hoses, dropped pump assembly, replaced belt, and reversed the process to re-assemble. Easy to find part and will definitely use your parts finder again. Lots less expensive than repair service or replacement
  • Scott from Cumming, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer tub wouldnt spin
removed the front of the washer
removed the "C" clip holding the idler pulley assembly in place.
replaced the broken idler pulley tension spring.
reassembled the idler pulley assembly.
installed a new "V" belt just for good measure (it is after all a 15 yr old washer....)

the hardest part was getting the "C" clip off and back on - but that still took less than 10 min total...
Other Parts Used:
V-Style Belt Tension Spring
  • Greg from Dublin, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
belt worn causing machine to make all kinds of noise
pull up on top ,take two screws loose on front panel(pull off) vaccum old debri out,pull tension pulley back pull old belt off,holding tension pulley put new belt on .put front panel back on and snap top back down to secure.
working perfectly nice and quite !!!
  • Kenneth from Baltimore, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
19 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Be the first to ask our experts a question about this part!

Model Cross Reference
This part works with the following models:
PartSelect Number: PS459613
Manufacturer Part Number: 5303280326
Brand
Model Number
Description
Kenmore
41789970100
Washer
Kenmore
41789970800
Washer
Kenmore
41789975100
Washer
Kenmore
41789975800
Washer
Kenmore
41799160100
Washer
Kenmore
41799160110
Washer
Kenmore
41799160120
Washer
Kenmore
41799160130
Washer
Kenmore
41799160800
Washer
Kenmore
41799160810
Washer
Kenmore
41799160820
Washer
Kenmore
41799160830
Washer
Kenmore
41799165100
Washer
Kenmore
41799165110
Washer
Kenmore
41799165120
Washer
Kenmore
41799165130
Washer
Kenmore
41799165800
Washer
Kenmore
41799165810
Washer
Kenmore
41799165820
Washer
Kenmore
41799165830
Washer
Kenmore
41799970100
Washer
Kenmore
41799970110
Washer
Kenmore
41799970800
Washer
Kenmore
41799970810
Washer
Kenmore
41799975100
Washer
Kenmore
41799975110
Washer
Kenmore
41799975800
Washer
Kenmore
41799975810
Washer
Tappan
44-2401-00-01
Washer - 24"
Tappan
44-2401-23-01
Washer - 24"
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service