Oven Door Handle Assembly

PartSelect Number PS45782

This oven door handle assembly is twenty-four inches long. The handle itself is black, but it has a metallic piece on each end. Also, this handle assembly comes with two mounting pads. Each mounting pad is black and a little over an inch long.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

1 of 2 people found this instruction helpful

Parts Used

  • Oven Door Handle Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPatricia from Phillidelphia PA

Broken oven door handle

First remove front oven door panel screws, then attach with 2 screws new handle part from inside door panel, reattach outer screws and job complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerTina from Hernando MS

Broken oven handle and missing indicator light

Removed the outer cover from the oven door by taking out approx. 9 screws. Cleaned the inside while I had it off. Attached the new handle with two screws (weren't included) had to use old screws. Then reattached the cover.
Replaced the indicator light by removing approx. 4 screws from the control panel. Slipped the new indicator lens in the hole and slid the light socket into place to hold the lens. Reattached the control panel.
Job Complete!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2