Light Bulb

Shut water off, removed back cardboard panel from fridge, disconnect water supply to valve, disconnect electrical plugs to water valve, removed defective valve, cut flexible copper supply tubing as connector was different, connect electrical plugs to new valve, install supplied compression nut & ring onto cut flexible copper supply tubing & re-connect water supply to new inlet valve, attach water inlet valve to fridge frame with supplied screw and added additional self tapping screw through second mounting hole into fridge frame to keep valve from shifting.

The parts supplied were made to fit. The hardest part was getting the original broken tabs out of the internal walls of the fridge with out damaging the internal insulation. I punched the center locking pin through completely, dug out the broken tabs and then reached into the hole with a dental pick and pulled out the center pin. The new parts fit perfectly and with a plastic mallet, tapped the new locking pin into place.