453396-1-M-Frigidaire-5303013071-Light-Bulb.jpg
453396-1-S-Frigidaire-5303013071-Light-Bulb.jpg 453396-2-S-Frigidaire-5303013071-Light-Bulb.jpg

Light Bulb

PartSelect Number PS453396

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $16.72
  • You Save

    $2.79
  • Your Price

    $13.93
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

6 of 12 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Wrench set

CustomerJay from Franklin WI

No ice or water through the door

Shut water off, removed back cardboard panel from fridge, disconnect water supply to valve, disconnect electrical plugs to water valve, removed defective valve, cut flexible copper supply tubing as connector was different, connect electrical plugs to new valve, install supplied compression nut & ring onto cut flexible copper supply tubing & re-connect water supply to new inlet valve, attach water inlet valve to fridge frame with supplied screw and added additional self tapping screw through second mounting hole into fridge frame to keep valve from shifting.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 8 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerTimothy C. from Aberdeen MD

Crisper drawer supports broke

The parts supplied were made to fit. The hardest part was getting the original broken tabs out of the internal walls of the fridge with out damaging the internal insulation. I punched the center locking pin through completely, dug out the broken tabs and then reached into the hole with a dental pick and pulled out the center pin. The new parts fit perfectly and with a plastic mallet, tapped the new locking pin into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2