452475-1-M-Frigidaire-5300809703 -Single Door Spring
Part Location Diagram of 5300809703 Frigidaire Single Door Spring
See part 1 in the diagram
452475-1-S-Frigidaire-5300809703 -Single Door Spring 360 view
( Grid squares measure 1x1 inch )
452475-1-S-Frigidaire-5300809703 -Single Door Spring 452475-2-S-Frigidaire-5300809703 -Single Door Spring 452475-1-S-Frigidaire-5300809703 -Single Door Spring 360 view
Part Location Diagram of 5300809703 Frigidaire Single Door Spring
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Single Door Spring 5300809703

 Fits your TDB652RBR0!
★★★★★
★★★★★
3 Reviews

Rated by 18 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 30.29
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your TDB652RBR0!
PartSelect Number PS452475
Manufacturer Part Number 5300809703
Manufactured by Frigidaire
Product Description

Single Door Spring Specifications

NOTE: Sold individually. This door spring is four and a half inches long. It is used for some dishwashers. These springs tend to wear out at the same rate, so you should replace both of your dishwasher door springs at the same time.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore, Tappan, Gibson.
Part# 5300809703 replaces these:
AP2135574, 12788, 809703
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Santiago L - July 2, 2019
  Verified Purchase
Door spring repair.
Received parts within a couple days and fit perfectly. Simple connection and in under 5 minutes I had a working door again.
★★★★★
★★★★★
Fred V - January 22, 2019
  Verified Purchase
Very happy
I’m very impressed your service and fast delivery. Thank you very much and continue your great and prompt service to your customers.
★★★★★
★★★★★
Karl H - July 11, 2018
  Verified Purchase
Easy does it!
Dito !!
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 18 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My Diswasher was leaking from around the door gasket.
I ordered a new door gasket and door spring. I unscrewed the two screws that hold the dishwasher in place and pulled it out. I pulled the old broken spring off with pliers and installed the new one ,,,very easy. I then took the new door gasket and soaked it in hot water in the sink for 15 min. That made it very soft and pliable to work with. I used pliers to pull the old gasket out then cleaned the area around the old gasket where crud had built up. I pushed in the new gasket working from top to bottom one side at a time. Turned it on an ran through a cycle and it works perfect now ,,,no leaks.
Read less
Other Parts Used:
Single Door Spring Door Gasket
  • Gregory from Pickerington, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door spring was broken
I removed the front panel below the door. There are 4 Hex screws, two at the top (accessible with the door open) and two at the bottom. After removing the screws, the panel came off, and I could reach inside to replace the springs. I found it easier to use a socket wrench than a screw driver.
Easily done. Anybody can do it. It took longer to clean up the panel than to do the actual repair.
Read less
  • Juergen from Shelbyville, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old springs were broken
used the pliers to grip the end of the spring, extended it and removed it from the door and frame. The install then followed. It takes longer to remove the front panel than to do the repair.
  • Daniel from Riley, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring broke
Removed 2 screws from the Access Panel and 2 screws from the Toe Plate using a Phillips head screwdriver. The broken spring was removed and replaced using the opposite spring as a guide as to the position of the spring. The opposite side (the unabroken one) was replaced. The panels were screwed back into place. End of repair.
  • Andrew from Canton, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken dishwasher door spring
Removed the lower panel (two screws near the floor, two screws with the door open).

Remove screws holding the top of the dishwasher in place.

Remove two screws holding the incoming water switch.

Pull the dishwasher out to access the left side of the dishwasher.

With the door closed remove the spring (replaced both left and right).

Test the motion of the door.

Reverse the process
1. push dishwasher back in
2. Attach water switch bracket
3. Attach top screws that hold the dishwasher in place
4. Replace lower panel
5. Attach screws for lower panel

Test the door motion,

I replaced the gasket a couple of years ago for less than $50. The springs with shipping for less than $25. I wonder how much longer the dishwasher will last. The repairs are easier than putting in a new dishwasher and a whole lot cheaper.
Read less
  • Richard from Falls Church, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door would "fall" open
Removed the "kick plate" (4) screws. the hard part was attaching the springs to the door hooks. you cannot see them, have to go by feel. then stretch them to lower frame. attached the lower door trim piece with three screws.
Other Parts Used:
Single Door Spring TRIM-DOOR-BLACK
  • Robert from commerce, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door sagging when open & sever water leak from door.
The parts arrived 20 hours after ordering -great service & the parts were just like like the removed parts only new. The old door gasket was pulled from its groove & and the new gasket was installed witout using tools. No more leaking water.The door spring installation wesa bit more difficult. The front bottom was removed with a nut drive, the broken springs were fished out, new springs were pull onto the arms and the cover put back in place. Not a bad job for a crippled, one-eyed 82 year old man.
Read less
Other Parts Used:
Single Door Spring Door Gasket
  • Harold from Amarillo, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One the door springs broke
We removed the bottom access panel, and were able to remove the broken spring. As others have suggested, we ordered two new springs, so we could replace them both at the same time. Unlike others, we didn't have to move the dishwasher out a few inches to access the springs. An easier repair than it might have been!
  • Fred from Brielle, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Spring broken, door hard to close.
I removed two screws that hold unit to countertop,
just pulled out unit about two inches. Removed broken door springs. Installed new door springs and pushed unit back into place and installed the 2 countertop screws DONE.
  • Christopher from Pensacola, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken door springs
very simple to do....attach spring to door...stretch to hole in frame and attach there...easy as 123
  • michael from McDonough, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
October 16, 2017
Replaced both door springs, door still falls.Have to always lock or door will fall open. Thanks
For model number FDB768GCC0
PartSelect logo
Hi Steve, Thank you for the question. If the springs did not fix the issue you may need to replace the Arm assembly,PartSelect Number: PS457862. If they are warped and not holding the door level you will have this issue as well. hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
ARM Assembly
$63.42

  No Longer Available
  • 1
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS452475
Manufacturer Part Number: 5300809703
Brand
Model Number
Description
Frigidaire
1032-005A
Dishwasher - DISHWASHER
Frigidaire
1041-002A
Dishwasher - DISHWASHER
Frigidaire
1071-003A
Dishwasher - DISHWASHER
Frigidaire
1081-000A
Dishwasher - DISHWASHER
Kenmore
5871400090
Dishwasher
Kenmore
5871400091
Dishwasher
Kenmore
5871400190
Dishwasher
Kenmore
5871400191
Dishwasher
Kenmore
5871400890
Dishwasher
Kenmore
5871400891
Dishwasher
Kenmore
587140091
Dishwasher
Kenmore
5871400990
Dishwasher
Kenmore
5871400991
Dishwasher
Kenmore
5871404080
Dishwasher
Kenmore
5871404081
Dishwasher
Kenmore
5871404082
Dishwasher
Kenmore
5871404180
Dishwasher
Kenmore
5871404181
Dishwasher
Kenmore
5871404182
Dishwasher
Kenmore
5871404880
Dishwasher
Kenmore
5871404881
Dishwasher
Kenmore
5871404882
Dishwasher
Kenmore
5871404980
Dishwasher
Kenmore
5871404981
Dishwasher
Kenmore
5871404982
Dishwasher
Kenmore
587140591
Dishwasher
Kenmore
5871409080
Dishwasher
Kenmore
5871409081
Dishwasher
Kenmore
5871409082
Dishwasher
Kenmore
5871409580
Dishwasher
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Single Door Spring
$ 30.29
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.