10 of 15 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Pliers, Screw drivers
CustomerThomas from Hilliard FL
No water flow in dishwasher.
This is the second time in 17 years that the dishwasher had no water flow. Basically I diagnosed the valve being bad bcause I unhooked the output side of the valve and had no water flow. I then verified that there was water on the input side and also checked the I had voltage at the valve telling it to come on. With these symptoms I was able to confirm the valve was bad.
9 of 14 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsPliers, Screw drivers, Wrench (Adjustable), Wrench set
Customerdavid from mcdonough GA
The inlet water valve was leaking into the dishwasher.
Pulled the dishwasher out. Removed the lower face panel , two screws on the top of panel and two screws on the bottom of the panel. Removed the two screws that hold the water valve and removed the valve, installed the new valve , installed the lower panel, put the dishwasher back in it`s position , turned on the water and checked for leaks, ran the dishwasher through a cycle , job done. Thanks to partselect for finding me the correct valve, my dishwasher is 12 years old and nobody else on the internet could help me get the right valve. Good price and fast shipping.