Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James T - January 7, 2020
Verified Purchase
Wife Is Happy
Part came in a timely manner. Was the correct part as ordered. Easy installation. Was a little pricy
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burner eye would only produce High Heat on all settings
Ordered a new Surface Burner Switch to replace the failed unit. When I opened the burner lid, I could see the insulation on all the wiring for the burners had fallen apart and wiring was exposed. The wiring for all 4 burners was exposed as the insulation had deteriorated and fallen off over 80% of the circuits. It was just blind luc
... Read morek there was not a fire or an electrical failure on a grand scale. I replaced the wiring and burner connection assemblies as they also showed signs of age and deterioration. Had the switch not gone bad, forcing me to look into the wiring assemble, there very likely would have been an electrical fire. In a 220 volt appliance, electrical fires are a lot more excitement than I need.
Scot Hooper Keller Texas
Read less
scot from keller, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
9 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marian
May 21, 2019
Is this switch for an expandable element that fails to shut off with current switch. Burner stays on low heat. The diagram shows part 54a. This part is just 54. Our wiring diagram number is 318047001. As of now we shut the burner off via our circuit breaker. It was made in 1995. Serial number is nf53700941
For model number FEC6X9XCC-A
Hello Marian, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS981086. Hope this helps!
If your light stays on when your eyes are turned off what could be your problem?
For model number FEC30S6ABA
Hi John,
Thank you for your question. If the indicator light is staying on and the burners are off, the issue is one of the burner switches and you will need to test the switches with a multimeter to see which one is causing the issue. Here is a link to one of our videos on YouTube that you may reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.