This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Frigidaire, Kenmore, Electrolux, Crosley.
Part# 808608804 replaces these:
318079001, 7318079001
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Steven R - December 7, 2023
Verified Purchase
Easy to find on your website
Part I needed was easy to find even though the stove was 18 years old. Your parts diagram allowed me to also see how to replace it.
★★★★★
★★★★★
Leland A Z - May 2, 2020
Verified Purchase
It worked
Correct part
Way overpriced
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Gas stove won’t light on half the appliance
First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the pow
... Read moreer and gas were turned off. The spark module was removed and then the stove was tested and we were back in business.
Read less
Julieta from ELMIRA, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
4 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
December 22, 2017
Can u tell me how many watts of electricity the spark module uses for the oven.
For model number FFGF3052TSA
Hello Steve, Thank you for your inquiry. The module, once it receives the L1 voltage from the switches, energizes the coils to produce approximately 12000-14000 VDC to the burners. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ron
February 2, 2023
The centre burner of our Frigidaire Cook Top is not working. There is no spark when you try to light the burner. I have replaced the Wiring Harness and Spark Module, but it still does not spark. When we try to ignite the burner there does appear to be a current running through the wire, however there is no spark to ignite the gas. Thoughts on what needs to be done (that I have not done)? Thanks
For model number FPGC3685KSB
Hi Ron,
Thank you for your question. If you have replaced both the wiring harness and the spark module and the center burner will still not light, the issue is likely the surface burner ignitor. The surface burner ignitor is part of the ignitor/orifice assembly. The part number listed under your model number for the center ignitor/orifice assembly is PS2364040. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
Hello Glenn, thank you for reaching out. You will first need to remove the screws holding the surface burner heads. After removing the burner heads, use a putty knife to release the clips of the main top assembly from the front side. After releasing the tabs, push the main top assembly, and then you can access the spark module. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ronnie
March 8, 2023
None of my top burners lite, i hear the ignitor clicking but burners do not light.
For model number GCRG302LAFA
Hello Ronnie, thank you for reaching out. Based on our research, if the ignitor is clicking and the burners do not light, then this may be due to a blockage in the gas supply line or due to grime, grease, and corrosion around the burner heads which interferes with the gas flow. We would suggest cleaning the gas stove and the supply lines and checking if the main gas supply is turned on or not. If this does not solve the issue, then you may need to check the following parts: the surface burner supply tube, part number PS3493052, and the regulator, part number PS8760219. We hope this helps, good luck with this repair!
OVEN DOES NOT HEAT ON BAKE PASS 100 BUT WORKS ON BOIL.
For model number FGGH3047VFA
Hi Horace, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the oven bake ignitor, part number PS2364063, to fix this issue. We hope this solves your problem!
The spark works and is visible, but the gas doesn't ignite
For model number FGGC3047QS
Hi Terence,
Thank you for your question. If one of your surface burners does not ignite, there are some parts that you will need to check to see which one is causing the issue. You will need to check the electrode in the surface burner, the switch assembly and the spark module. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
The central burner does not ignite. When I turn the central burner to "lite", I hear a spark, but the spark is to the front left burner. If I manually light the central burner, there is gas to the burner, and it works fine. I have tried cleaning up the burner, but this did not resolve the fact that there is no spark to the central burner. Note the other four burners work (spark properly). Any suggestions on what else to do. If I need to replace a part, can you please let me know what part(s) I need to get the central burner working again? Thanks.
For model number FPGC3685KSB
Hi Ron, thank you for reaching out. You need to check the Spark Ignition Harness, part number PS2332922, and Spark Module, part number PS11770793. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
