Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ed
March 25, 2018
What nozzles do I need to convert my range back to natural gas? Also need instruction sheet for this thank you
For model number FGF366CCB
Hi Ed, Thank you for the question. You will require three of the Part Number: PS439993 and one Part Number: PS439991. We do not have a instruction sheet on how to install the Orifice, but they just screw in place. You will also need to adjust the oven valve. There is a brass screw on the top of the valve that will need to be adjusted. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
December 7, 2017
How can I tell if it is set up for LP or natural gas?
Hi Jim, Thank you for the question. The appliances always comes set for Natural Gas. If the appliance has never been converted to LP it will still be on Natural Gas. You can also check the pin on the gas regulator to see if it is flipped to NAT or LP. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kenneth
June 13, 2019
If not lp what part number are the lp ones
For model number FGF326ASA
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2351422. Hope this helps!
I need burner orifices for this model to convert it back to using natural gas. Lost one of the originals
For model number FGFL77AQE
Hello Jennifer, thank you for writing. This Top Burner Orifice part PS439993 is a compatible replacement for your model.
Was this helpful?
Thank you for voting!
Kathy
September 27, 2019
I need to covert stove from lp to natural gas what part do i need ?
For model number FGF326ASD
Hi Kathy, thank you for your question. You would need to get one of the center orifice and two of each of the other two parts that I have listed below for you. Good luck with your repair.
Need to convert from lp back to natural gas, and do not have the parts anymore.
For model number PLGFZ397GCA
Hello Zachary, Thank you for writing. For your Model, PLGFZ397GCA you will need one # 44 PartSelect Number PS978281, one #44A PartSelect Number PS439994, one #44B PartSelect Number PS439992 and two #44C's PartSelect Number PS439993. Good luck with your repair.
Right Front, and left rear igniters do not spark, but can be lit with match. Which is the most likely part failure, and how do I diagnose the problem?
For model number FGF337ESD
Hello Michael, Thank you for the question. This most likely indicates the electrode is faulty and the Igniter/Orifice Assembly will need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I'd like to change my stove back to nat gas from lp. Can i just find the correct sized number drill bit for the inches of water column that the nat gas will operate at, and drill the lp orifices to that size for the btu value that the nat gas orifice will provide?
For model number FGF366BCB
Hello Don, thank you for your question. We do not recommend trying to drill out the orifices. To change the unit back to natural gas you will require three of the Part Number: PS439993 and one Part Number: PS439991. We do not have a instruction sheet on how to install the Orifice, but they just screw in place. You will also need to adjust the oven valve. There is a brass screw on the top of the valve that will need to be adjusted. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
