http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/E9UPQMY6.gif
See part F15B in the diagram

Radiant Burner Element with Limiter - 9" - 2500W

PartSelect Number PS439838

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Element will not heat.
  • Compare At

    $102.17
  • You Save

    $17.03
  • Your Price

    $85.14
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 4 reviews What's this?
1-4 of 4
 

22 of 26 people found this instruction helpful

Parts Used

  • Radiant Burner Element with Limiter - 9" - 2500W

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerSTEPHEN from GREENBUSH ME

9" radiant burner element stopped working.

VERY IMPORTANT! kill the circuit breaker to the unit and/or unplugged it! 2 screws hold the ceramic glass top to the lip @ top of oven--remove them and the top can be lifted up to expose all the burner elements and wiring--remove the 2 end screws that hold the retainer bracket for the burners - then remove the 2 screws that hold the burner in question to the bracket-there's also a retainer pin that needs a bit of fussing with to completely free the burner--once totally free remove the wires from the bad unit to the good unit exactly as they are situated --install new unit onto bracket with screws and bracket back to its original location on the ceramic top-put top back down and replace both anchor screws--initiate power back to unit and yeeehahh--You just saved yourself lottsa money from repair bills!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

14 of 22 people found this instruction helpful

Parts Used

  • Radiant Burner Element with Limiter - 9" - 2500W

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

Customerjavier from oceanside CA

Connection to surface element was broken

I went all the way around the unit and removed screws holding top of unit in place. Removed knobs holding front panel in place. Remove control panel. top should come off. Remove screws attaching element top and metal frame. Undo bracket and remove element. Disconnect wires. Remember where they were attached.
Replace element and reverse steps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 13 people found this instruction helpful

Parts Used

  • Radiant Burner Element with Limiter - 9" - 2500W

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Socket set

CustomerKwok from Silver Spring MD

One element in a glasstop range would not engage

All of a sudden, one element in our glasstop range would not light and heat up. My wife and I were not sure what to do. Looked it up on the internet, found that you can do it yourself as others desribed the process of accessing the elements below. We decided to do that. It takes two people as one is holding up the glass because it opens like a car hood. While we diagnosed it was not a wiring issue (found a burnt wire, rewired the burnt wires (after mending the non burnt portions) to another element. The element that was not working before still did not turn on. Decided to purchase an element. While many online places sell elements, PartSelect actually allowed searching by brand with exploded views of the range to select the exact parts. This lessened the worry of purchasing a wrong element. When the part came (almost one day later), the repair was less than five minutes. Thank you PartSelect. I feel I saved a lot of money and aggravation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 13 people found this instruction helpful

Parts Used

  • Radiant Burner Element with Limiter - 9" - 2500W

Level of DifficultyReally easy

Time to do repair:1- 2 hours

ToolsNutdriver

CustomerRashiklal from Marietta GA

Front right radiiant burner was damaged

Followed the instruction printed on the page, while ordering the part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4