439447-1-S-Frigidaire-316134900         -Oven Temperature Sensor
439447-1-S-Frigidaire-316134900         -Oven Temperature Sensor 439447-2-S-Frigidaire-316134900         -Oven Temperature Sensor

Oven Temperature Sensor

PartSelect Number PS439447

Also known as probe, oven temperature probe or oven sensor. Replace when F3 shows on your display.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Oven is too hot.
  • Little or no heat when baking.
  • Will not start.
  • Compare At

    $73.42
  • You Save

    $12.24
  • Your Price

    $61.18
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 6 reviews What's this?
1-6 of 6
 

17 of 21 people found this instruction helpful

Parts Used

  • Oven Temperature Sensor

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerMarilyn from Richmond MO

Oven wouldn't heat up-panel kept showing f-3

Pulled out the stove, removed the screws that held on the back panel, took out the 2 screws that held in the element and disconnected the wires and put the new one in. I put the screw back in and was finished!

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 7 people found this instruction helpful

Parts Used

  • Oven Temperature Sensor

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

Customerjeff from portage MI

F3 alarm

Removed screws. Unplugged temp sensor. Put screws back in. So easy a caveman could do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

  • Oven Temperature Sensor

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerJenifer from St. Marys WV

The temperature was irratic the entire time the stove was on. I would set it for 350 and it would go up to 425 then down to 275. It was all over the place.

It was great. We ordered the part, it was shipped the next day and I had it the day after that. It was easy to install and the stove has worked perfect since. Color us happy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 9 people found this instruction helpful

Parts Used

  • Oven Temperature Sensor

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench set

CustomerJonathan from Lewisburg PA

F3 error

I removed the back panel, about 6 screws, then found the probe which was attached by 2 screws. Unscrewed them and unplugged it. Plugged the new one in and replaced all the screws. The oven works like a charm now! No more F3 errors!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 9 people found this instruction helpful

Parts Used

  • Oven Temperature Sensor

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJames from Clarence NY

Error sensor on display when oven was used

I looked up the error code on line and found it was likely a faulty oven temp sensor. I was able to find the part and diagram at partselect.com and placed an order. The probe was in stock and arrived within a couple days. The repair took only about 20 minutes and works fine now. Thanks for your help partselect.com!
Jim

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 11 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsSocket set, Wrench(Adjustable)

Customerjuan from hallandale FL

The oven stoped working and an f3 displayed on the board also a smell of gass was present

thanks to you 'r assistsnce First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, and changing the regulator was just as easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-6 of 6