439086-1-M-Frigidaire-316117500-Inner-Oven-Door-Glass.jpg
439086-1-S-Frigidaire-316117500-Inner-Oven-Door-Glass.jpg

Inner Oven Door Glass

PartSelect Number PS439086

This is also called the heat barrier glass.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $124.69
  • You Save

    $20.78
  • Your Price

    $103.91
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

24 of 36 people found this instruction helpful

Parts Used

  • Inner Oven Door Glass

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMitch from Fernandina Beach FL

Cracked oven door inner glass

Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 23 people found this instruction helpful

Parts Used

  • Inner Oven Door Glass

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

Customerstephen from garden grove CA

Broken glass interior oven door

Had to reference original owner's manual for instruction(s) on how to remove oven door. Used several "YouTube" videos to reference oven door design (Oven door glass is actually several layers of glass.) After completing about 30 mins of research and finding the right square drive bit, the repair went smoothly and without complications. The biggest challenge was researching and understanding what part(s) were needed and how to replace them. It seemed liked a lot of work doing the research however it sure beat a $350 repair bill. It cost me $90 and about 1 1/2 hours of total time. Oven works better than ever, thanks parts select for the part(s) and diagram(s) ...

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2