Quick Question!

Have you ever purchased from PartSelect.com before?

439060-1-S-Frigidaire-316116400         -Oven Light Socket
439060-1-S-Frigidaire-316116400         -Oven Light Socket 439060-2-S-Frigidaire-316116400         -Oven Light Socket 439060-3-S-Frigidaire-316116400         -Oven Light Socket http://www.partselect.com/Schematics/Frigidaire/BCEV5KRR.gif

Oven Light Socket

PartSelect Number PS439060

The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel to access the socket for the repair. You will also need to remove the current light bulb and the light lens cover so that the old socket can be removed. As you will be working around electrical circuits for this repair, be sure to disconnect the power source from the oven before you begin work on the oven.

This part works with the following brands: Frigidaire, Kenmore, Tappan, Gibson, Crosley, Kelvinator, Electrolux, Westinghouse, Uni.

This part works with the following products: Range, Wall Oven, Cooktop, Microwave Oven Combo, Freezer.

Compare At


You Save


Your Price

Order within the next 1 hr and 15 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 1 reviews What's this?
1-1 of 1

37 of 44 people found this instruction helpful

Parts Used:
  • Oven Light Socket
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Paul from Spokane Valley, WA

Oven light receptacle broken - bulb base broke off

Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snapped in easily from inside the oven as well. Replaced wiring, installed new bulb, restored power & tested. Replaced back cover. Good time to vacuum under/behind where the oven usually lives before sliding it back to the wall.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1