8 of 14 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsSocket set, Wrench(Adjustable)
Customerjuan from hallandale FL
The oven stoped working and an f3 displayed on the board also a smell of gass was present
thanks to you 'r assistsnce First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, and changing the regulator was just as easy.
7 of 12 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Wrench set
CustomerAlbern from Bainbridge IS. WA
Regulator had propane leak past diaphragm
removed two screws disconnected inlet pipe and two outlet pipes, removed regulator. Replaced with new regulator. performed leak Test.