437630-1-S-Frigidaire-316049800         -Dual Surface Burner Switch
437630-1-S-Frigidaire-316049800         -Dual Surface Burner Switch 437630-2-S-Frigidaire-316049800         -Dual Surface Burner Switch 437630-3-S-Frigidaire-316049800         -Dual Surface Burner Switch

Dual Surface Burner Switch

PartSelect Number PS437630

You can select what size surface to use according to the size of your pots and pans.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $131.02
  • You Save

    $21.84
  • Your Price

    $109.18
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

11 of 17 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerTerri from Seabeck WA

Burner knob post busted off....and burner element burned out

My husband opened the oven door.He removed the metal strip at the top just under where the knobs are.I held the top of the stove up while he unscrewed the 2 screws on either side of where the knob goes and he unplugged the connectors on the switch assembly one at a time a reconnected the new ones. We slid the post through the hole and lined up the two holes put the screws back in. Walah. I cont. holding up stove he got a socket to unscrew the strip holding the back elements in place. He undid just the one side used pliers to squeeze clamp together pushed the little post through the slot....unplugged the connectors keeping track of them. He used a screwdriver to unscrew clamps to screw them onto the new element at the same number as he took them off the old element. We popped the new element back in hooking up all connectors poked the little clamp posts through the holes attached the screw that is the strip holding elements in place. We closed the stovetop We lined the metal strip up at top of oven door underneath the knobs and put the 4 screws back in and closed the door. Done. I would say it took maybe 30 min.if that. Works like a champ.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 8 people found this instruction helpful

Parts Used

  • Dual Surface Burner Switch

Level of DifficultyReally easy

Time to do repair:More than 2 hours

ToolsScrew drivers

CustomerBillie from Arlington WA

Element stays on high

found your website ,asked the question, got an answer, recieved a diagram and a possible problem diagnosis. obtained the part threw PartSelect quickly. took the knob off unscrewed two screws out ,disconnected the terminals and reconnected to new switch put the two screws back in and put the knob on!!! thanks ncountry "

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 4 people found this instruction helpful

Parts Used

  • Dual Surface Burner Switch

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAbe from Manson WA

Burner quit working

Received the new part FAST. Ordered online. Easy to plug in the new part. Will use PartSelect.com again when needed to order parts!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3